RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   blitz dual bov question (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/blitz-dual-bov-question-205171/)

Overtaker 07-14-03 12:19 AM

blitz dual bov question
 
just 1 questions

if i want to adjust that bov
which part do i turn?
I'm completely clueless

Fatman0203 07-14-03 12:25 AM

One more question. Is this a good BOV?? Sound good too?

Little 7 07-14-03 01:23 AM

Blitz BOV sounds loudly.

Overtaker 07-14-03 11:07 PM

blitz doesnt sound that good
but it's a good bov for your turbos

93blackrx 07-14-03 11:12 PM

which bov is the best? I know there is probably a huge thread on this somewhere, but I'm a lazy ass.

Matt

maxpesce 07-15-03 10:59 AM


Originally posted by 93blackrx
which bov is the best? I know there is probably a huge thread on this somewhere, but I'm a lazy ass.

Matt


For stock fd turbos the STOCK bov is best b/k It is included FREE :D and when vented to the atmosphere insted of into the airbox it is plenty LOUD. :cool:

Fatman0203 07-15-03 11:56 AM


Originally posted by maxpesce
For stock fd turbos the STOCK bov is best b/k It is included FREE :D and when vented to the atmosphere insted of into the airbox it is plenty LOUD. :cool:
Its LOUD but not loud enough, I want to make those people that think their fast know that they cant f*ck with the 7.

areXseven 07-15-03 12:32 PM

Maxpesce: How do you "vent to the atmosphere"??? Do you mean .......having to disconnect the hose leading from the BOV to the filter (I've got K&N set-up) and plugging nipple coming out of filter adapter? Leaving the BOV opened on the end? Please educate me on this procedure. Thanks.

maxpesce 07-15-03 12:38 PM


Originally posted by areXseven
Maxpesce: How do you "vent to the atmosphere"??? Do you mean .......having to disconnect the hose leading from the BOV to the filter (I've got K&N set-up) and plugging nipple coming out of filter adapter? Leaving the BOV opened on the end? Please educate me on this procedure. Thanks.
You Got It - Some people say you have to add a small filter to the BOV hose b/k it MAY suck air under certain conditions - But I am not convinced.

areXseven 07-15-03 12:49 PM

maxpesce: I'm lost again!! Which BOV hose is it that may need a small filter? The hose-end that was disconnected from the BOV? (now coming out of the K&N adapter?) Thanks for your help!! And is it okay to leave the BOV end opened?

potatochobit 07-15-03 03:21 PM

the blitz is not loud because it is turbo friendly. the sharper the blow off, the greater the chance of back spin. to adjust the blitz. there is a little hex nut on top. loosen it and then turn the threaded shaft with your fingers. look at the top of the bov, it has 2 arrows that tell you sharper or loose. be sure to retighten the hex nut when u hav adjusted it. not with your gorilla arms, just make it snug.


All times are GMT -5. The time now is 12:52 AM.


© 2024 MH Sub I, LLC dba Internet Brands