anyone running Midpipe without Boost Creep??
 

That is with an intake, DP, Midpipe, and catback. I want to go with a midpipe or high flow cat...But do not want to run into boost creeping. Thanks ;)

I have M2 Intake, M2 downpipe, SR Midpipe, and a RB Cat-bak and run a Greddy Profec-B. The profecb works like a charm. There are a low and high boost setting on the ProfecB. I run a solid 10psi @ low and Solid 14psi @ high. But you can set it to whatever you need. No Creep at all.

Ron
94 R2
350 RWHP @ 14psi

I'm running RE intake, Pettit ECU, Pills for boost, and DP w/Open 4" Ti HKS exhaust. Boost 13-14(spike)-13 with no boost creep.

I ran on a cool night WOT 4th from 80 to 160 with a solid .9 bar on my HKS gauge.

I think the boost creep problem is over blown??? HaHa

MP is the best power maker for the money.

Later, Jeff

That's it....gotta have one now!! I think I will just go with the cheap mild steel from RP. I'm sure I'll be taking it off and on frequently anyway. Need more Power....gotta have more power..hehe. ;)

No boost creep here. I have upgraded turbos so that might change things.

btw, i'd go with the stainless its worth the extra dough.

I creep w/ Profec B and full exhaust. Gonna port the wastegate one of these weekends.
~Tom

I had creep before I ported my wastegates.

No I can set the boost to as low as 8psi and it stays steady with not creep.

HOWEVER, before I ported the WG I needed to run a restrictor plate in the exhaust and then I could only keep it steady at around 11 psi, with creep if it got colder.


Mike

p.s. does anyone want those plates?

Something i would do is have it ceramic coated, thermal barrierd, or jet hot coated etc. As with your down pipe. It does make quite a bit of difference with under hood temps. My .02, CJ