I'm about to put on a downpipe, got all the studs out, they came out with the bolts attached. So I'm going to put new ones it and I know they make tools for installing them. I found this....

http://www.motionpro.com/motorcycle/partno/08-0151

I think the studs are M10X1.5, can anybody confirm this? If so does anybody know of a source for the correct stud install tool. The one I found and linked above is M10x1.25

I know I can use two nuts and lock them together, I've done this a number of times installing cylinder head studs on jetskis. This is a really tight space and I want to be able to torque it down without having the nuts sllp and then have to screw around with it when I can't really see.

Anybody know if this is a good way to go? Can you direct me to an online store that would sell a M10x1.5 stud installer?

 

They are M10x1.5. I have not heard of using a stud install tool for this application. You just thread them in and the locking pinch on the nut applies torque to the stud as well. No need to torque the stud in advance.

David

 

Thanks David, that is good information, looks like it will be a little easier than I thought.

 

I have a Matco Tools set I use at the shop. Mine look to be much lower profile. Beats using vice grips!

 

Let me introduce you to your new best friend -

http://www.amprotools.net/product_li...id=5&mode=show

Found this at Advance Auto a few years back. Hands down the COOLEST tool I've ever bought.

The set handles most every size metric stud. Each bit has 3 round rollers inside that grip the stud as you loosen or tighten. It will remove and install studs EASILY and WITHOUT DAMAGE TO THE STUD. It's so cool!

One big thing I use them for is doing a motor build - remove the studs in the irons, makes it super easy to get in there and clean properly. For downpipe studs it works well, but make sure to use plenty of PB Blaster and patience.

BTW, there's a set on Ebay right now still at 99 cents .

Dale

 

I could have definitely used those in the past. Having the right tool for the job sure makes all the difference in the world. I hope I don't ever need the tool. I'm hoping the downpipe will be a one time deal, and maybe my turbos will just last forever. wishful thinking I'm sure