RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)

- - Air bag (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/air-bag-821868/)

Ice_Mazda

02-23-09 03:45 AM

Air bag

Im putting my loom back in the car after a total respray and i was thinking of removing the SRS airbag loom, has anyone done that??

it isn´t to much of a problem, im just wondering about the diognostics module can i take it out without any problems???

badddrx7

02-23-09 05:43 AM

I have done it three times. If you want it completely gone you will have to have access to the ring harness that runs behind the das, up around the front of the car and back. It is easy. Remove the sensors also, the module, and all of the wires. USe the shop manual electrical drawing to help you. Also take out the air bag bulb.

LAter

antiSUV

02-23-09 06:17 PM

I did this with my car. You basically just take the harness out of the plastic wire wrap and remove the blue airbag harness and everything having to do with the airbag system. If the dash is already out of the car it's not a big deal to go ahead and do this.

muibubbles

03-19-10 03:45 AM

reviveeeeeee

so can i just pull all the wires that are connect to this?
http://i426.photobucket.com/albums/p...8/P2190124.jpg

is it okay if i cut the wires if i need to? will it mess anything up besides not being able to reuse the wireS?
thanks

All times are GMT -5. The time now is 07:42 AM.