99-spec front bumper, what other parts are needed?
 

Im working on my fornt bumper conversion, and will order my (hopefully) last batch of parts from Amayama.com, before ordering the large parts from the dealer.
So then i have some questions about what smaller parts from the front bumper assembly should i get?

What i have now is:
Front Bumper Skin - F138-50-031A-AA
Bumper Reinforcement - F138-50-070B
Under Tray Splash guard - F140-56-1B0A
Right brake duct - F138-43-63XB
Left brake duct - F138-43-64XB
Air guide - F138-50-A21

Using the Mazda EPC2 i can easily find the parts number once i know what i needs, but for some reason, i cant fint the correct assembly showing the oil cooler ducts. Does anyone have this available?

Attached the front bumper assembly:
https://cimg1.ibsrv.net/gimg/www.rx7...11d40f5b71.png

i don't think 99 spec bumper has oil cooler ducts available.
Only the brake ducts.

Although, I saw someone here selling oil cooler ducts for 99 spec bumper that is made from r magic.

I meant brake ducts :D RHDjapan sells the oil cooler ducts from R-magic so i might grab those from them :)

There's different levels of 'need' :lol:

Also depends on oil cooler setup, fog light setup, and whether you mind chopping up your USDM rebar.

I'm out the door but will post more later tonight ;)

I also read in a thread that i should get the 99-spec radiator shroud also:
https://www.rx7club.com/3rd-generati...s-like-409531/

Umm I've done this twice. All you need is the front bumper, lip and turn signals and trim the reinforcement.

The rest is optional.

The "need" is strong in me. I want stuff to be OEM and i hate ruining original parts by cutting them, so i just remove them, put em in bubblewrap and store them.

So i will get a complete setup with 99-spec rebar and all, so any help would be awesome! My setup is based on a stock EU 94 mod. Its basically an R2 with all the Luxury (AC, sunroof, leather etc)
It does not have the front foglight harness (we have rears only) from factory. But at some point i may redo the wires to support it, and get the 99-spec fogs or similar.

I have already sourced:
Right front combo light - F138-51-060B
Left front combo light - F138-51-070B
Right front air skirt (chin spoiler) - F138-51-9K1B
Left front air skirt (chin spoiler) - F138-51-9L1B
Right brake duct - F138-43-63XB
Left brake duct - F138-43-64XB
Air guide - F138-50-A21

What i dont have yet is:
Front Bumper Skin - F138-50-031A-AA
Bumper Reinforcement - F138-50-070B
Under tray Splash guard - F140-56-1B0A
Under tray Air Skirt - F138-50-AH1

I will buy the large parts from the local dealer. Smaller (Air skirt) will be from Amayama.com

Im not sure if i need the 99-spec radiator shroud:
Radiator Shroud - N3A2-15-211C

I found that part number for the 2000+ RX7 models, where 94 was marked with A and B. But searching online show the same C part also for 94.

I heard series 6 under tray can work with 99 spec bumper.
I have not confirmed this even though I have both.
I may check it out during next oil change.

Don't get the fog lights, that shit looks terrible.

99-spec front bumper, what other parts are needed?
 

I have the 99 spec setup
Except for the fog lights
I bought the 99 reinforcement but found it to be in the way of my front mount setup so I sold it to another member and had my current rebar trimmed

I used the under tray sold by Shine in my setup

Thats a matter of opinion. I think they look great and are pretty cheap!:icon_tup:

Agreed on the matter of opinion

Speaking of Fog Lights, are these connectors for the fogs? They are in the way of my oil coolers and before i cut away, would like to know what they are for


https://cimg8.ibsrv.net/gimg/www.rx7...37daa9c2ec.jpg

They are. Id you ever want to add the OEM fogs dont cut that off... Or I can trade you for a modified 93-95 bar for yours. :-)

It's all the little things that are killing this to do it correctly. Need to find a Spec '99 front clip complete!

:-) neil

not that expensive to get from mazda xD