99 rx-7 wiring harness
 

Does anyone kno where i could buy a 99 and up wiring harness? Are the harnesses the same as 93-95? thanks

Be real careful about this. Despite the series-8 (99-02) looking similar to the series-6 (92-95). There are major differences in the wiring harness.

Comparing a 92 JDM harness to the 92 US spec harness has a few differences. (rhd vs lhd) Add 7 years & two updates (S6 to S8), plus a more complex 16 bit ECU and your going to be setting yourself up for quite a bit of work.

Converting the body harness to lhd format is hard enough. Although the engine harness will be a little closer.

Its hard enough here in Oz where we share the rhd format, plug changes, wiring changes all makes it unworthy.

Good luck & regards

The wiring harnesses are not the same. They will not work with a 93-95 ECU.

93-95 = 8bit ECU
96-99 = 16bit ECU
99-02 = 32bit ECU

Hey if you are looking for a 99 wire harness for motor, there is one that works on usa rx7 with same mb, no difference!

$858.00 at 305-820-8710