AT to 5-Speed Cost
I was wondering what the total cost for a 5-Speed tranny swap would end up being, parts only. And if anyone could tell me what the estimated labor costs would be on top of that, it would help.
|
It depends on where you buy the parts from. Don't know about labor.
You need: 5spd trans w/shifter, boots, clutch release fork brake and clutch pedals clutch master, slave and lines Starter driveshaft diff (optional but the car will be a DOG with the auto diff) flywheel and clutch assembly ECU speedo and tach (optional also) Engine wiring is different, either replace with 5spd harness or modify the existing one (don't know how much work is involved here) Jeff |
do a search for JR. He did a conversion a couple of months ago and it came out pretty sweet. It depends how you wanna go with the clutch and flywheel and all..but it can run somewhere btwn 2000-2500 w/ intsallation.
I had the same dilemna with my old auto. I was going to do the conversion as well but i ended up selling the car. I miss that car! It was prestine, but it was auto, and couldn;t be modded much. Now im in search of another mint FD |
All the info on my conversion can be found here - http://jrx7.rx7life.com/auto5speedswap.htm
It realy depends on what kind of luck you have finding the used parts. Low side would be $1500 and high would be $2500. Then figure in at least $1000 for labor probably closer to $1500. So your final costs will be between $2500 and $4000, but you can make at least $500, probably more, back by selling off your old auto parts. |
cost me 500 for parts ;)
|
$500
Originally posted by ejmack1 cost me 500 for parts ;) |
All times are GMT -5. The time now is 12:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands