13b rew question
 

Ok I was just sold a motor thats suppose to be a 13b REW with S4 intake/exhaust and turbo. Couple questions. How do I tell if its a genuine 98 13b REW and whats the diff between that motor and just a run of the mill 13bt?

13BT has the motor mounts on the center plate. The 13B-REW has the motor mounts on the rear plate. The front cover's are different. The 13BT has SMALL intake ports, especially the secondary intake port, when compared to the 13B-REW.

Its got an fb front cover.. how exactly do I identify the motor?

^^^^^^^^^ just curious where you live
location reads hot or wet hawaii????

Location: Where there's only two seasons, hot and wet! I love Okinawa

if it has an FB front cover, then it has the motor mounts attached to it right? FB = motor mounts on the front cover, FC = motor mounts on the intermediate, FD = motor mounts on the rear plate. That's the EASIEST way to identify.

How do you know it has an FB front cover? Where are the MOTOR MOUNTS located?

lol...thanks Jonski

yea the motor mounts are on the front cover. and there no sign of any rear mounts.

The s4 and s5 manifolds do not fit on a fd motor.

yeah, I forgot about that too. But do they fit the GSL-SE's? Or could it be a S4 engine with SA front cover?

others have said this but no one has been able to tell me why?

the S4/S5 exhaust manifold fit, but the intake manifold bolts don't line up.

I think the reason is in the ports.

The FC ports are a different size to the FD ports, thus the bolt holes may be out of whack. Perhaps thats why they dont fit.

apparently its been ported, could that take up the slack?