|
feed rear fender install? rivnuts...
what rivnut or nutsert size and bolt size are you using to mount the rear feed fender?
thanks ! |
bump
|
4 Attachment(s)
definitely late with this but this is what i used. its a perfect fit. i also used washers under the heads of the allen bolts
Attachment 608594 Attachment 608595 Attachment 608596 |
2 years later ... thanks!
|
Ayyyyyyyyy
|
Some recommend to use wellnuts, not rivnuts. They use rubber or similar, and seal better. It prevents water from entering the unibody, and rattling.
|
I'm 3 years in with mine with no water intrusion and none have loosened
|
Narfle has probably seen that YouTube build with the rocket bunny kit and is referencing that. That was kind of disastrous and the next owner ended up drilling out all the rivnuts and using well nuts. Matt |
B is for botched.......... goodness.
|
bump! anything in black I can use?
I got self-tapping screws with the FEED kit. :'( |
On my S2000, I used M5 rivnuts. You wont see the rivnuts with the over fender installed, so just get some black bolts.
|
| All times are GMT -5. The time now is 06:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands