RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Gen General Discussion (https://www.rx7club.com/3rd-gen-general-discussion-322/)
-   -   99 spec rear caliper vs 94?? (https://www.rx7club.com/3rd-gen-general-discussion-322/99-spec-rear-caliper-vs-94-a-1123786/)

BNR34RB26DETT 02-25-18 11:04 PM

99 spec rear caliper vs 94??
 
So i purchased a 94 FD where previous owner claims that rear calipers are from 99 (larger)

1. what do i need to look for to verify that these are in fact from 99?
2. what size brake pads am i looking for? is it larger than 94? (i need new brake pads)
3. what size rotors am i looking for? is it larger than 94? (i need new rotors as well)

i apologize for the noob questions.

7krayziboi 02-25-18 11:20 PM

Bracket that mounts to caliber & disc diameter

BNR34RB26DETT 02-25-18 11:40 PM


Originally Posted by 7krayziboi (Post 12256446)
Bracket that mounts to caliber & disc diameter

do you know what size rotor/ brake pad i would be looking for in this case?

caredden 02-26-18 12:05 AM

Pads are the same size. Rotors are in this thread



https://www.rx7club.com/3rd-generati...-36-a-1123586/

7krayziboi 02-26-18 12:06 AM

314x20

Ceylon 02-26-18 08:20 AM

There is no such thing as '99 brakes.

There are two types of brakes fitted as standard to FD's, the larger of the two (314x32 front and 314x20 rear) were fitted from '92 onwards to certain models e.g. the RZ, RS, RS-R, SP, SR etc. The very early pre '92 RZ's had the smaller brakes.

'99 FD's have the same brakes as USDM FD's unless they're a special edition e.g. an RS, RZ or SR model.

BNR34RB26DETT 02-26-18 11:31 AM

Thanks for the info everyone!
I called stop tech and apparently, they do not have anything in the size of 314.
i have measured my rotors and they are in fact 314.

now the question is, does anybody know where i can purchase these rear rotors thats 314 in size? https://cimg7.ibsrv.net/gimg/www.rx7...60d3c90e34.jpg
https://cimg8.ibsrv.net/gimg/www.rx7...fe98824eb6.jpg
https://cimg0.ibsrv.net/gimg/www.rx7...ceb65dc988.jpg

Spalato 02-26-18 12:12 PM


Originally Posted by BNR34RB26DETT (Post 12256540)
Thanks for the info everyone!
I called stop tech and apparently, they do not have anything in the size of 314.
i have measured my rotors and they are in fact 314.

now the question is, does anybody know where i can purchase these rear rotors thats 314 in size?

part number F124-26-25XA

Option 1: "Mazdacomp" Mazda Motorsports Development - You need to have a racers account to order
(while your at it buy a set of new backing plates for cheap! F124-26-261)

Option 2: RHDjapan - https://www.rhdjapan.com/mazda-oem-k...otor-fd3s.html

Option 3: amayama.com - https://www.amayama.com/en/part/mazda/f1242625xa

Option 4: Any other place that can source the part number. Keep in mind these are JDM rotors and are not available as a standard part in the US market, so Stoptech and others will not have them

Spalato 02-26-18 03:58 PM

Option 5: https://www.rx7club.com/3rd-generati...-36-a-1123586/


All times are GMT -5. The time now is 05:33 AM.


© 2024 MH Sub I, LLC dba Internet Brands