99 spec rear caliper vs 94??
#1
99 spec rear caliper vs 94??
So i purchased a 94 FD where previous owner claims that rear calipers are from 99 (larger)
1. what do i need to look for to verify that these are in fact from 99?
2. what size brake pads am i looking for? is it larger than 94? (i need new brake pads)
3. what size rotors am i looking for? is it larger than 94? (i need new rotors as well)
i apologize for the noob questions.
1. what do i need to look for to verify that these are in fact from 99?
2. what size brake pads am i looking for? is it larger than 94? (i need new brake pads)
3. what size rotors am i looking for? is it larger than 94? (i need new rotors as well)
i apologize for the noob questions.
The following users liked this post:
BNR34RB26DETT (02-26-18)
The following users liked this post:
BNR34RB26DETT (02-26-18)
The following 2 users liked this post by 7krayziboi:
BNR34RB26DETT (02-26-18),
fc3s-ty (01-17-24)
#6
Non Runner
iTrader: (3)
There is no such thing as '99 brakes.
There are two types of brakes fitted as standard to FD's, the larger of the two (314x32 front and 314x20 rear) were fitted from '92 onwards to certain models e.g. the RZ, RS, RS-R, SP, SR etc. The very early pre '92 RZ's had the smaller brakes.
'99 FD's have the same brakes as USDM FD's unless they're a special edition e.g. an RS, RZ or SR model.
There are two types of brakes fitted as standard to FD's, the larger of the two (314x32 front and 314x20 rear) were fitted from '92 onwards to certain models e.g. the RZ, RS, RS-R, SP, SR etc. The very early pre '92 RZ's had the smaller brakes.
'99 FD's have the same brakes as USDM FD's unless they're a special edition e.g. an RS, RZ or SR model.
The following users liked this post:
BNR34RB26DETT (02-26-18)
#7
Thanks for the info everyone!
I called stop tech and apparently, they do not have anything in the size of 314.
i have measured my rotors and they are in fact 314.
now the question is, does anybody know where i can purchase these rear rotors thats 314 in size?
I called stop tech and apparently, they do not have anything in the size of 314.
i have measured my rotors and they are in fact 314.
now the question is, does anybody know where i can purchase these rear rotors thats 314 in size?
Trending Topics
#8
Rotary Enthusiast
iTrader: (33)
Option 1: "Mazdacomp" Mazda Motorsports Development - You need to have a racers account to order
(while your at it buy a set of new backing plates for cheap! F124-26-261)
Option 2: RHDjapan - https://www.rhdjapan.com/mazda-oem-k...otor-fd3s.html
Option 3: amayama.com - https://www.amayama.com/en/part/mazda/f1242625xa
Option 4: Any other place that can source the part number. Keep in mind these are JDM rotors and are not available as a standard part in the US market, so Stoptech and others will not have them
Last edited by Spalato; 02-26-18 at 12:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
drift13b88
2nd Generation Specific (1986-1992)
7
10-29-10 03:40 PM
Gabriel82
2nd Generation Specific (1986-1992)
16
02-01-09 05:01 PM
2wankel
1st Generation Specific (1979-1985)
6
01-19-07 07:01 PM