Anyone have a step by step on installing greddey pulleys???

 

Shouldn't be so hard.. I don't personally have em yet.. but..

Remove secondary intake
Remove S pipe off of lower I/C (makes it easier)
Disconnect elec connector from airpump
Loosen tension bolt for alternator (12mm)
Remove belt
Remove 2 12mm bolts from airpump
Disconnect hoses from airpump and remove
Remove airpump tension bracket
Plug hoses that went to airpump
Remove nut on alternator (if you can't take off alternator and have someone w/ an impact tool to take it off) take pulley off and replace w/ GReddy pulley
Remove 4 10mm bolts off water pump pulley and replace w/ GReddy pulley
Install new belt from GReddy
Tighten alternator tension bolt
Replace I/C and intake pipes

 

sweet, the pulley kit jsut came in, im wondering wether or not i should try the install myself or have someone else do it, is it any thing i can **** up, im all about doing things myself, i just heard you can mess things up doin this........

 

Do it yourself.. it's pretty easy w/ the right tools!!
The only thing you can **** up is replacing the Main Pulley which your not touching... if you need help, i'm on AOLIM.. JaySpec7

 

this is a pain in the ***, i didn't know i would need a gear puller or whatever
looks like the car will be down for a few days, untill i can get the alternator off and take it in, i cant get the air pump off either..

 

A gear puller? For what?

Where are you stuck at w/ the airpump?

Take the alt to a garage..

Try soaking the bolts w/ liquid wrench..

 

Before you do it!..read MAZDATRIxs article regarding THRUST BEARING during main pulley installation.