2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Are you guys telling me a AUTO tranny cant be built up to handle 200HP?

Thread Tools
 
Search this Thread
 
Old 06-11-04, 12:02 PM
  #1  
Rotary Enthusiast

Thread Starter
 
gentlejax2's Avatar
 
Join Date: Apr 2004
Location: shreveport, La.
Posts: 809
Likes: 0
Received 0 Likes on 0 Posts
Are you guys telling me a AUTO tranny cant be built up to handle 200HP?

I know you all hate the auto and I have found not single post on here of anyone who has kept it and made it stronger.

I cant believe it is not possible to beef up the stock tranny to take 200HP or Less....


It is in my best interest all around $$ & time wise to keep with the AUTO . The car currently has no tranny or motor and I really want to get it running .

It is a 91 and I would rather have it over my 88 Vert.

surely it is possible. I saw a AUto RX7 1990 that had 0-60 times of 4.9 for sale on EBay a while back and it seemed OK..


I know I was able to dramatically improve my Auto in my 4.6 Bird with valve body modifications and a cooler & converter.

????

no flames please, I already know you guys hate auto but....
Old 06-11-04, 12:05 PM
  #2  
knowledge junkie

 
vaughnc's Avatar
 
Join Date: Mar 2001
Location: Atlanta, GA
Posts: 5,595
Likes: 0
Received 6 Likes on 4 Posts
Try the J-spec Turbo II automatic transmission.

Last edited by vaughnc; 06-11-04 at 12:10 PM.
Old 06-11-04, 12:07 PM
  #3  
Rotary Enthusiast

 
OverDriven's Avatar
 
Join Date: Feb 2002
Location: VA
Posts: 938
Likes: 0
Received 0 Likes on 0 Posts
You can do anything you want with $$$. The guy on ebay in all likelyhood was full of ****. However, of course you can beef up an auto tranny. The question is...do you have the time and money to do it, and would that time and money be better spent on doing a 5-speed swap?

-Joe
Old 06-11-04, 12:12 PM
  #4  
Full Member

 
NA2TurboProject's Avatar
 
Join Date: May 2004
Location: (Mira Mesa)San Diego, CA U.S.A.
Posts: 115
Likes: 0
Received 0 Likes on 0 Posts
It CAN be done, probably will handle it stock... autos are tough, man.
Old 06-11-04, 12:15 PM
  #5  
Boost Addict

iTrader: (3)
 
nashman69g's Avatar
 
Join Date: Nov 2001
Location: Metairie, LA near new orleans
Posts: 1,898
Received 13 Likes on 8 Posts
i used to drop it from neutral to first a lot it held up until I broke my U-joints on my driveshaft...but all in all it was still slow!
Old 06-11-04, 12:16 PM
  #6  
Ho's and Cadillac Doors

 
2ndGen.rocket's Avatar
 
Join Date: Apr 2002
Location: ATL, GA
Posts: 2,703
Likes: 0
Received 1 Like on 1 Post
I think the bigger question here is why would you even want to?
Old 06-11-04, 12:28 PM
  #7  
ScrewD Rotary Division

 
sman789's Avatar
 
Join Date: May 2004
Location: va beach/blacksburg 4 school
Posts: 149
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by vaughnc
Try the J-spec Turbo II automatic transmission.
ooo, where could i find one of those....i'm looking to do the same thing with my auto 90 gxl...not straight light power....i wanna try the twisties
Old 06-11-04, 12:42 PM
  #8  
casio isn't here.

 
casio's Avatar
 
Join Date: Sep 2002
Location: Greenpoint, Brooklyn
Posts: 3,332
Likes: 0
Received 0 Likes on 0 Posts
some people had an auto built to handle 700hp for a honda crx drag car. i dont know what parts are available or needed for rx7 auto trannies. i believe Level 10 performance was the builder of the transmission.
Old 06-11-04, 01:03 PM
  #9  
**-P I drive a miata.

 
nonameo's Avatar
 
Join Date: Jul 2002
Location: albany, GA
Posts: 1,600
Likes: 0
Received 0 Likes on 0 Posts
what about the JC cosmo auto tranny?
Old 06-11-04, 03:10 PM
  #10  
REINCARNATED

iTrader: (4)
 
Relisys190's Avatar
 
Join Date: Apr 2003
Location: South Eastern USA
Posts: 1,642
Received 140 Likes on 98 Posts
Originally posted by nonameo
what about the JC cosmo auto tranny?
Brilliant!

That or an auto from the Japan T2 Auto. These are essentially the same units directly from the cosmo with minor gearing differences.

look to spend around $400.00 for one of these units.

Regards,
-Markus
Old 06-11-04, 06:47 PM
  #11  
Rotary Enthusiast

Thread Starter
 
gentlejax2's Avatar
 
Join Date: Apr 2004
Location: shreveport, La.
Posts: 809
Likes: 0
Received 0 Likes on 0 Posts
OK, if you read my post you would see that the reason is because I dont have the time to get all the parts and modifications that would be required to do a swap to 5spd.

I need to be able to drop it in and go.

you guys say it is slow. How slow??

what is the 0-60 times of an 91 auto VS
a 88 Vert all stock ???

If not all stoc k then say maybe a 88 vert with exhaust & intake VS a 91 Auto
with exhaust and intake.


give me something other than your opinion based on comparison of your car which is a 5sp and modified.


what are the numbers for all car?

I will do a search. If the Auto 91 is not slower than a heavy 88 Vert 5spd then that is all I need to know other than if the tranny will blow up with stock power.

I have no tranny so I am prepared to spend a little for the Auto and it seems nobody wants them so I should be able to find one.

I will need to have a running car before September and I would prefer tto have the 91 over the 88 vert if I had a choice for multiple reasons.


that is the point of my post. to find out if anyone on the planet has a auto that will handle basic to mild power.


the car on Ebay was sweet. I would have bought it in a second if I hadnt tied up my money on 2 verts.

Now I am going to have 1 vert and one 91 to get running but I can only keep 1 car and the coupe is more to my needs.
Old 06-11-04, 07:38 PM
  #12  
I'm a boost creep...

 
NZConvertible's Avatar
 
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes on 8 Posts
Originally posted by gentlejax2
It is in my best interest all around $$ & time wise to keep with the AUTO .
That isn't necessarily true. I would think having the stock auto rebuilt to make it perform better and handle more power is going to cost at least as much as a 5-speed swap.

Originally posted by vaughnc
Try the J-spec Turbo II automatic transmission.
This is a better idea. The Turbo auto is a pretty good box. Any importer of J-spec engines should be able to source one, as the engines often arrive with the gearbox still attached.

BTW, technically there is no J-spec "Turbo II".

Originally posted by nonameo
what about the JC cosmo auto tranny?
Not worth the effort or extra cost. The FC Turbo auto is more that sufficient, and the JC auto is controlled by the stock ECU.

Originally posted by Relisys190
That or an auto from the Japan T2 Auto. These are essentially the same units directly from the cosmo with minor gearing differences.
I don't know where you got that dodgy bit of info, but JC production started after FC production stopped, so I don't see how the FC's auto could come "directly from the Cosmo"...

Last edited by NZConvertible; 06-11-04 at 07:40 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tylerx7fb
1st Generation Specific (1979-1985)
39
05-27-19 12:45 PM
IB Cristina
West RX-7 Forum
0
08-20-15 05:46 PM
Clacor
Single Turbo RX-7's
0
08-14-15 09:17 AM



Quick Reply: Are you guys telling me a AUTO tranny cant be built up to handle 200HP?



All times are GMT -5. The time now is 03:09 PM.