wire connector
 

what wire connector would this be? single connector

its on the right side of the oil filter(lookin at it from the drive side). wire connector is also on the right side of the engine <grease> nozzle!! the connector has this writing on it

0.117/250
R17G (white triangle here)
'F:

is this an engine ground?

come on please very important, help does it need to be connected?

Hard to tell without a pic. Is everything on your car working correctly? With the car running test the wire for power. If there is no power, touch the wire and the chassis using the continuity tester and see if it beeps. If it does, you have a ground wire.

Sounds like the oil pressure sender's condensor, it is a small black box right??? It should be screwed down to the clutch slave or the engine and plugged into the yel/red wire nearby.

And that "grease" fitting you mention is the bleeder for the Clutch slave. Please never ever put grease into that.

i didnt know what that bleeder nozzle was sorry!! anyway i think icemark ur right but for some reason the car stays running now on cold start up instead of stalling once!!

is there a write up on this oil pressure senders condensor? thanx again y'all the wire wasnt connected thats why i ask and the haynes manual didnt say anything about it!!