Who has Supercharged their 2nd Gen RX7?
 

Who has Supercharged their 2nd Gen RX7?

*raises hand slowly*

I was wondering why you were able to help so much. Do you have any pics of the setup?

Nope, but then again, it's not really complete. :)

Here's some specs:
FD serpentine setup
Greddy v-spec FMIC
S-AFC2, Walbro 255, 720 & 1000 injectors
stock TB mounted *BEFORE* the charger
charger sits ontop of the engine, blows out to the drivers side into the IC, comes back on the passanger side through a custom intake manifold which mounts ontop of a ported tII LIM to fit the n/a block.

Have you been able to start the car yet, and if it is running what psi have to gotten to?

By the way that is a cool sounding setup

Nope, still busy ordering parts & fabricating stuff up. I'm going to start with an S-ported M90, and if I can't get 300hp out of it, then I'm putting the M112 in it's spot. If that fails, it's time for a Wipple.

That is too cool. I like the way you are doing it. I was just trying for more power for less. But as you know these things take on a life of their own. I think I am going to check all the vac lines for leak and then get a smaller pulley and a cooler.

just go straight for the whipple, they are small and effiecient, just expensive

Expensive is my problem. I wasted all my money on the other stuff. :)

But don't worry, as soon as I can afford it, I'm going to slap a Whipple 2300AX (2.3l/.834cfm p/rev) on there. That should get me somewhere. :)

sonic, have you thought about either porting that supercharger yourself or having someone do it?

already ported.

do you guys have any pics of your set up?

I need to hurry up and sell my engine...

Haha, why is that? :) I want this damn m90 to put out at least 300hp, or I'm going to be pretty unhappy. As far as I can figure that's about the limit of it. If it doesn't work, that whipple sure oughta be interesting, Almost .8l/rev more than the m90. :)

because the sooner I sell my engine, the sooner I can get started on MY supercharged 7 project.

my supercharged 7 project is already under way....:Biggrin:
im thinking half bridge port on mine, im not sure though, maybe just an agressive streetport

can anyone give me some info on supercharging? like a link to a site or anything at all?
that would be great, thanks
:bigthumb:

search the forum...someone built a supercharger kit specifically for the 7....atkins i think....

NuTbAgSaN....
Heres some info on Superchargers on what they do.

http://www.camdensuperchargers.com/index.php?pag=3

I cannot wait to see some of the write-up on these supercharger projects.

I just need to make some money so I can start my own supercharger project.

Good work you all. :D

Anyone make any more progress? I have access to an M90 and I am wondering how everyones setup is running before I jump on the bandwagon.