![]() |
Where does this wire go?
I was installing the mazdatrix strut tower brace with firewall mounts and engine brace, when I found a wire that was not connected to something. What is this, and where should it go?
http://snoopy.wiredgeek.net/~mwise/g...erialNumber=1O |
It's an engine ground.
|
If my memory is correct it attaches to the motor by way of one of the transmission bolts.
|
yeah, just connect it to the engine somewhere.
|
There should be a 10mm bolt on the top of the bell housing. Attach it there.
|
Originally Posted by RotaryRocket88
(Post 9212191)
There should be a 10mm bolt on the top of the bell housing. Attach it there.
|
Originally Posted by g14novak
(Post 9212269)
It goes on the bolt for the flywheel peek hole.
|
It's a bonding strap b/t the chassis and the engine/transmission. Goes to one of the bolts that holds the transmission and engine together. Offer it up to the nearest one. I've driven several yrs without that one being attached. But recommend attaching it to one of the bolts mentioned.
|
1 Attachment(s)
Not sure why people are saying it goes onto one of the main transmission bolts. It would never fit on one of those bolts, unless you modify it. I've attached a picture of my pair of TII transmissions. You can see both ground straps are attached to their own 10mm bolt. NA transmissions have the same thing in a slightly different spot. It doesn't matter where it goes on the block/bell housing, but there's no sense making it more difficult that it has to be.
|
lim to uim bolt
|
follow the pics that rotaryrocket put up..on top of the tranny there is a specific 8mm hole where a 10mm head bolt will secure it too the tranny thru the ring connector in your first pic..if you dont figure it out by tomorrow ill take a pic of it with the tranny in the car if that makes it easier for you to locate..depending on weather you still have all your emissions and extra crap on your motor it may be more difficult to locate. but in reality you can ground it anywhere to the motor.
|
Originally Posted by RotaryRocket88
(Post 9212787)
Not sure why people are saying it goes onto one of the main transmission bolts. It would never fit on one of those bolts, unless you modify it. I've attached a picture of my pair of TII transmissions. You can see both ground straps are attached to their own 10mm bolt. NA transmissions have the same thing in a slightly different spot. It doesn't matter where it goes on the block/bell housing, but there's no sense making it more difficult that it has to be.
"cause I forgot where it really goes and was tooooo lazzzzy to go look at a car. |
Originally Posted by HAILERS
(Post 9213913)
"cause I forgot where it really goes and was tooooo lazzzzy to go look at a car.
|
All times are GMT -5. The time now is 01:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands