RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Where to buy: S5 motor (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/where-buy-s5-motor-467850/)

christaylor 09-29-05 04:52 PM

Where to buy: S5 motor
 
I need your help, dudes. I've got a 91 vert here that needs a new motor (thanks to some shade tree motherfucker that grounded the low water sensor). The owner wants a new motor; I'd like to rebuild. I can't blame her... she needs this thing running ASAP.

She called a few places, ended up talking to RP. They want ~$1500 for a reman, and will give $500 back for a core. I could've sworn somebody stopped by my shop and was telling about a place in Houston (maybe?) that sold JDM-tyte engines for less than that. I wanna say he told me he was getting a complete turbo setup for ~$1100 or so. Don't need a turbo setup, but I figure if their turbo setups are that much surely an N/A is cheaper, eh?

I don't particularly want to change this engine twice (the second time for free) so a source for known good remans and/or pulls would be nice. For this reason, no replies that contain "Atkins" anywhere in them. Thanks.

Juiceh 09-29-05 05:34 PM

http://www.pineappleracing.com/
http://www.rotaryresurrection.com/

1987RX7guy 09-29-05 05:44 PM


Originally Posted by christaylor
I need your help, dudes. I've got a 91 vert here that needs a new motor (thanks to some shade tree motherfucker that grounded the low water sensor). The owner wants a new motor; I'd like to rebuild. I can't blame her... she needs this thing running ASAP.

She called a few places, ended up talking to RP. They want ~$1500 for a reman, and will give $500 back for a core. I could've sworn somebody stopped by my shop and was telling about a place in Houston (maybe?) that sold JDM-tyte engines for less than that. I wanna say he told me he was getting a complete turbo setup for ~$1100 or so. Don't need a turbo setup, but I figure if their turbo setups are that much surely an N/A is cheaper, eh?

I don't particularly want to change this engine twice (the second time for free) so a source for known good remans and/or pulls would be nice. For this reason, no replies that contain "Atkins" anywhere in them. Thanks.



There were no N/a FCs sold in Japan.

lostNtheSpin 09-29-05 06:02 PM

check this out...a company called ROTARYWORKS......904 282 6889 from middleburg fl.....they sell 13bt's 1250 complete long blocks, 13b-REW FD engines starting at 2800., 13b-RE COSMOS enigine 2000, 20b_REW the almighty triple rotor 4200, t2 trannys 350, FD trannys 700. also they have a special for 13BT either S4 or S5 with T2 tranny for 1500.

lostNtheSpin 09-29-05 06:04 PM

or a company called ROTARY RESURRECTION $1100 89-91 13B non turbo core has to be recieved up front and 500 to begin work or $1300 for 89-91 13B Turbo...but with 600 down.....does not come with entire engine....these are only REBUILDS.....but can get a 12 or 18 month warranty on any.

Juiceh 09-29-05 06:05 PM

He said he needs to get the car back running ASAP. Getting a anything more than a NA will require more work suchs as a full TII swap to go with the 13bt if they want it done right.

Juiceh 09-29-05 06:05 PM


Originally Posted by lostNtheSpin
or a company called ROTARY RESURRECTION $1100 89-91 13B non turbo core has to be recieved up front and 500 to begin work or $1300 for 89-91 13B Turbo...but with 600 down.....does not come with entire engine....these are only REBUILDS.....but can get a 12 or 18 month warranty on any.

read Post #2 :D

d_rotary_rocket_b 09-29-05 06:22 PM

whatever you do, do NOT buy any engines from jspecautosports.com........they're just a horrible company......enough said

christaylor 09-29-05 07:29 PM

Thanks for the info, guys. The owner had called RP and they indicated to her they could sell her a motor. When my dad called this afternoon, they don't sell engines unless they install them (for warranty purposes... can't blame them). So it looks like I'll just rebuild the sucker!

I've rebuilt plenty of 12A's... is there any special trick to 13B's? I'm pretty sure I've got a shop manual sitting around somewhere, just thought I'd check and make sure there aren't any snags I'll find out when I've got it's guts spread out on the teardown bench. :D

christaylor 09-29-05 09:53 PM

I know the man that came up with the idea for 5 bazillion vacuum lines on this car, and his name is Satan.

Motor's almost out... just gotta get the A/C and undercar stuff loose. Wee.

jhammons01 10-04-05 01:38 AM

1 Attachment(s)
Well since we are calling folks out......

Whats all this shit about you having all this race technology yet a 13b rebuild eludes you??

Call up Mazdatrix and have them red label you some parts. and put the motor together uber quick......cause you are the uber race motor guru per your web site.

Man, I thought the guys on Queer Eye were a bunch of sissy's

OBTW if your customer wants a rebuild I'll do it this week for a lot less than a reman.

Here is a bit of reserch, just go on the archives and look at the 13B rebuild thread from karack and follow dDubs recipe for part an you have the parts for less than $500 bux....retail....oh I forgot you have a shop maybe you could get better pricing. and then again by the tone of your clueless questions maybe you should just get a reman for your customer.

If you need any further help here is a document......not that you deserve MY help

BOOSTD 7 10-12-05 09:28 AM


Originally Posted by lostNtheSpin
check this out...a company called ROTARYWORKS......904 282 6889 from middleburg fl.....they sell 13bt's 1250 complete long blocks, 13b-REW FD engines starting at 2800., 13b-RE COSMOS enigine 2000, 20b_REW the almighty triple rotor 4200, t2 trannys 350, FD trannys 700. also they have a special for 13BT either S4 or S5 with T2 tranny for 1500.

Shane at Rotaryworks ripped us off, got months of advertising in RX Tuner and then disappeared never paying his bill. Now his number has been disconnected for a long time, and he doesn't answer email. Yet another scammer in the rotary world, just what we need :rolleyes:

Bukwild 10-12-05 10:10 AM

damn that doesn't seem like Shane. Their might be a resonable explaination on this one. Boostd7 you should start a Where's Shane thread in the 3rd and 2nd gen sections.

BOOSTD 7 10-12-05 10:19 AM


Originally Posted by Bukwild
damn that doesn't seem like Shane. Their might be a resonable explaination on this one. Boostd7 you should start a Where's Shane thread in the 3rd and 2nd gen sections.

Well, that's what we thought too. But Brian has made every effort to contact him for months and months with no reply.


All times are GMT -5. The time now is 01:00 PM.


© 2024 MH Sub I, LLC dba Internet Brands