RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Where to buy aftermarket stock Rear Fenders? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/where-buy-aftermarket-stock-rear-fenders-343792/)

silverrotor 08-31-04 05:06 AM

Where to buy aftermarket stock Rear Fenders?
 
With Mazda's retail of $526 for each rear Fender, I'm looking for an alternative. Is there any source where these can be had for a good deal?

RETed 08-31-04 05:23 AM

How do you get just the rear fender?
I thought it was double-wall steel back there?


-Ted

introVert 08-31-04 07:12 AM

Kinda like a door skin, I imagine- you gotta do some cutting and welding.

Audiofight 08-31-04 08:20 AM

the cutting and welding can be a real pain in the arse too......gotta be careful not to warp the new steel

banzaitoyota 08-31-04 08:37 AM

you are going to have to use used

silverrotor 08-31-04 04:05 PM

Mazda offers them In two versions...

With the first, you get the wheel wheel stretched to the rear Bumper. The second one span out In It's entirety- from the Door frame to the rear Bumper.

So yes, they can be had new. There has to be an aftermarket catering to the rears.

*Update*

I was able to track down new front Bumpers for $80can, as opposed to $120can retail. They are aftermarket and they meet all the standards that Mazda has - except they are not OEM. Further, the manufacturer has salt tested them for many hours. Anyway, he cannot get them for the rear.

banzaitoyota 08-31-04 07:23 PM

What I meant is there is no aftermarket rear skin available

Rxmfn7 08-31-04 07:30 PM

Tony if you'd like a set of aftermarket rear wide fenders, Im selling a set, check the FS section.

silverrotor 08-31-04 08:37 PM

I was refering to front Fenders, not front Bumpers earlier and the original quote of $526 for the rear Fenders are In Canadian currency before discount. I'll have a look Leonard, thanks. ;)

silverrotor 08-31-04 08:42 PM

Rxmfn7, origin of these Fenders? Make? Pics of them mounted?

Rattaan 08-31-04 09:07 PM

You do realize that getting someone to cut out and install a new rear fender will cost about one left nut and your right hand? How bad is the damage to your's? Is it the same problem I've heard a few others here have with rusting around the wheel well? I have the rear edge of my passenger side rear wheel well slowly rusting through and an ex-body-man and good friend of mine suggested a piece cut and weld. he real problem is finding the cause that it rusted out in the first place. The exterior paint was fine, so water/salt/crud must have gotten in there from somewhere?


All times are GMT -5. The time now is 11:07 PM.


© 2024 MH Sub I, LLC dba Internet Brands