RX7Club.com - Mazda RX7 Forum - walboro fuel pump install

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)

- - walboro fuel pump install (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/walboro-fuel-pump-install-506704/)

NSXchink

02-05-06 06:21 PM

walboro fuel pump install

would like to know if anyone ever had a write up on how to install a walboro 255 fuel pump..
i searched in the archives and no luck

thanks

NZConvertible

02-05-06 07:52 PM

It's a direct replacement for the stock pump. Very easy job. Follow the FSM instructions for removing the pump (pg 4B-71). From there it's self-explanatory. I'd recommend the rewire if you haven't done it already. The Walbro draws a lot more current that stock.

http://www.1300cc.com/howto/how2/rewire.htm

NSXchink

02-05-06 09:54 PM

your awsome man thanks, i'll read up on it

savana

02-05-06 10:15 PM

it must depend on the type of walbro you use, my one sure as hell wasnt a direct replacement

1RX7DRIVER

02-05-06 10:17 PM

what one did you use? i used a 255 and it sure as hell was a drirect replacement took me about 20min total to change them out very easy

Pinfield357

02-05-06 10:28 PM

Quote:

Originally Posted by 1RX7DRIVER

what one did you use? i used a 255 and it sure as hell was a drirect replacement took me about 20min total to change them out very easy

ill 2nd that the hardest part was removing the screws that hold in the sender

All times are GMT -5. The time now is 07:38 AM.