RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   VID of my FC (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/vid-my-fc-381398/)

felixwankel88 12-30-04 11:37 PM

VID of my FC
 
well the exhaust is a all cats hollowed out.. and i think the y pipe is bigger that stock


i know it has a idle issure any ideas

it does sound pretty good at the higher rpms.....

http://www.club-swat.com/~felixwankel88/To%205.5k.wmv

Kenteth 12-30-04 11:39 PM

wow.. definately sounds freeflowing, lol. Sor the idle, it needs to be bumped up about 300-400rpm :P

felixwankel88 12-30-04 11:47 PM

it idles now at 1200 so it would be like 1500-1700 till solid idle

Rx7MPGUY84 12-31-04 12:34 AM

sounds like a Bridge ported motor when theres no exhaust on it:)

dreamnshadow 12-31-04 01:21 AM

so at 5.5k, there's supposed to be no smoke coming out?

BlaCkPlaGUE 12-31-04 02:38 AM

that idle is fucked, sounds like mine when my tps was bad. I bought a new one and it was a smooth idle, not this jumpin around crap ;)

Other than that, sounds mighty fine my man.

felixwankel88 12-31-04 08:45 AM

it really sound like its ported... i bought the engine used, it very well could ported (i hope lol)

i will look into a nEw TPS

Kingofl337 12-31-04 09:05 AM

damn I just tossed a s4 TB with a TPS on it. :(

I'll check see if I can get at it.

sleejay 12-31-04 12:00 PM

sounds like an air ratchet at idle

sounds fine at higher rpms though
i love how the 7s sound
:)

autopilot 12-31-04 01:11 PM


Originally Posted by felixwankel88
well the exhaust is a all cats hollowed out. . .

Are you sure that's going to pass inspection? I did that a few years back and got the Scarlet R.

felixwankel88 12-31-04 02:16 PM

i think im gonna have to pay a little extra 4 a sticker... lol if u know what i mean

uRizen 12-31-04 07:58 PM


Originally Posted by felixwankel88
i think im gonna have to pay a little extra 4 a sticker... lol if u know what i mean

Lol, do you guys actually get away with that? That's cool though. I bet that thing will drive you nuts in less then a week. :D I had a shattered Y-pipe and drove with that until my head hurt after quick 5 minute trips, then gutted my cats last week and installed a new Racing Beat y-pipe, it kicks ass.

Now I just have to get a replacement for my main cat. It was weaker then I thought, and developed a crack towards the rear when I was pushing into place to bolt it up, so it's louder then I'd like. I'm aiming for a Racing Beat presilencer if I can find one used for a good price.

I took a vid as well while I was re-grounding stuff today :D

right-click, save as...

What kind of mufflers are you planning on finishing your exhaust with?

bennettaru 01-01-05 04:58 AM

hmmm, that's an interesting sound, is it ported? to me it doesn't sound like it is, just a mucky idle


edit, sorry re-read what was there


yeah, to me it doesn't sound ported, sorry mate, but hey, now you get to choose the port you want

felixwankel88 01-01-05 10:53 AM

mufflers are going to be apexi Dual N1's

91mazdarx7 01-01-05 12:28 PM

[QUOTE=uRizen]Lol, do you guys actually get away with that? That's cool though. I bet that thing will drive you nuts in less then a week. :D I had a shattered Y-pipe and drove with that until my head hurt after quick 5 minute trips, then gutted my cats last week and installed a new Racing Beat y-pipe, it kicks ass.

Now I just have to get a replacement for my main cat. It was weaker then I thought, and developed a crack towards the rear when I was pushing into place to bolt it up, so it's louder then I'd like. I'm aiming for a Racing Beat presilencer if I can find one used for a good price.

your exhaust dont sound bad i got a racing beat dp pre silencer for sale its 2.5'' for n/a rx7's PM me if your interested


All times are GMT -5. The time now is 08:49 PM.


© 2024 MH Sub I, LLC dba Internet Brands