turbo size
 

what size turbocharger is on an 88 t2? and will a garrett t3 fit the manifold?

It's a Hitachi HT-18.
http://asciimation.co.nz/turbine/page1.html

The T3 turbo is entirely too small for the 13B. You need at least a T04. If you want a bolt-on upgrade to the stock HT-18, see here:
http://66.216.67.51/subcatmfgprod.asp?0=220&1=364&2=-1

hey what hp gains would i see from this stage 3 turbo charger??
http://66.216.67.51/product.asp?0=220&1=364&3=728

and would i have to add any mods to my car to support this turbo??

anyone?

try emailing bnr.

I think the stage 3 is the t04b wheel and housing?

That should be able to put down 320-330 rwhp

You will need a fuel controller and more fuel. You could get away with an safc, but a stand alone EMS like e6k or microtech lt8 would be better. You'll need bigger injectors and an upgraded fuel pump. You can get away with the stock top mount, but a front mount would really be the best choice.

a guy down my street is running a T04 and he still has top mount. i think he just upgraded to 850cc injectors and he has apexi boost controler,supra TT fuel pump, and still running on stock bov and hasnt had any problems with it

thanks for the tip

just using this knowledge for future education when i rebuild my car when it breaks down