RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Turbo choices? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/turbo-choices-1087034/)

TrianglePower 07-23-15 12:40 PM

Turbo choices?
 
I recently purchased a t2 fully dressed block to do a turbo swap in my convertible. Was wanting to up the turbo, fuel system, exhaust, and most likely street port it. The big hesitation I have is, what turbos will work on the t2 that will fit into the Vert? Obviously a few things are clear here: I have to do more research on what all the numbers mean when it comes to turbo, and I will need a different manifold. I keep hearing "send the stock turbo off to bnr or call turblown" but I was just seeing what all choice I really have. My end goals are 350-400hp so that is to be kept in mind.

Turblown 07-23-15 09:52 PM

If you have the vert underbrace still on the car( behind the front subframe) this can interfere with some full turbo system upgrades. All of our turbo systems will clear it.

I would use our EFR IWG 7670 kit, there is a group buy going for our new cast units too. Check my signature.

TrianglePower 07-23-15 11:14 PM

My issue I guess mainly relies behind budget. Were I able to drop $3k on those or a Greddy kit or whatever, id do it in a heartbeat. But currently that's not the situation.

MickeytFC 07-24-15 02:38 AM

If you don't have 3k for upgrades, then forget about it and try to run a stock setup for the time being.

Aaron Cake 07-25-15 10:28 AM

What's your budget?

Because besides the turbo, there's the intercooler, custom downpipe, wastegate/plumbing, standalone, injectors, fuel pump, wiring supplies, wideband, and misc.

TrianglePower 07-25-15 02:43 PM


Originally Posted by Aaron Cake (Post 11945549)
What's your budget?

Because besides the turbo, there's the intercooler, custom downpipe, wastegate/plumbing, standalone, injectors, fuel pump, wiring supplies, wideband, and misc.

Aaron that was exactly my point. The reccomended turbo that turblown is an awesome turbo, but after dropping that much on the turbo I still have to buy everything that you noted. And that's where the issue lies. I've heard that if I send my stock one to Billy, it can reuse most of the stock parts for now other than obviously the fuel and computer systems.

misterstyx69 07-26-15 07:46 AM

If you love something...set it free...

If you can't afford an RX7 Turbo setup...it Wasn't meant to BE!...

signed,
*Some wise ass Japanese guy!*

I'm still paying to play..(even though the car is gone.)

jackhild59 07-26-15 08:52 AM


Originally Posted by misterstyx69 (Post 11945839)
If you love something...set it free...

If you can't afford an RX7 Turbo setup...it Wasn't meant to BE!...

signed,
*Some wise ass Japanese guy!*

I'm still paying to play..(even though the car is gone.)

I thought you were a Canuck

TrianglePower 07-26-15 06:45 PM

Just got with Billy at BNR and ill be honest, everyone is right. Its a great price for a great product, and that's most likely the route I plan to take. The eBay turbos are just that from what I see, and follow the standard rules of "Reliable, Fast, Cheap. Pick Two" thanks for everyone's input!


All times are GMT -5. The time now is 02:04 PM.


© 2024 MH Sub I, LLC dba Internet Brands