RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Transmission Mounts (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/transmission-mounts-81854/)

pd_day 05-22-02 01:09 PM

Transmission Mounts
 
How often do the tranny mounts go bad?
what are the symtoms of bad tranny mounts?
I am going to be installing a new clutch.....good idea to change them too?

Thanks

Scott 89t2 05-22-02 01:18 PM

the mazda comp ones are only $10 each. why not!! :D

pd_day 05-22-02 01:47 PM


Originally posted by Scott 89t2
the mazda comp ones are only $10 each. why not!! :D
Did you put those on your car yet?
How long was the shipping to Canada?

Green 05-22-02 02:28 PM

There are 2 types of tranny mounts... A
A: the big crossmember( which has a rubber bushing PRESSED into it... You can't replace the bushing, have to buy the whole new part..) 70 bucks at mazdatrix I think..
B: Then there are (2) "Y-block mounts" up above that are like 10 bucks each...


shipping probably about 4-5 business days, unless you pay more for quicker shipping.. that's to Omaha NE at least.. not sure about toronto

Scott 89t2 05-22-02 03:42 PM


Originally posted by pd_day


Did you put those on your car yet?
How long was the shipping to Canada?

going on tomorrow, with the mazda comp front diff mount as well. less then a week I think.

pd_day 05-22-02 03:56 PM


Originally posted by Scott 89t2


going on tomorrow, with the mazda comp front diff mount as well. less then a week I think.

Hey Scott, do you have the part numbers for the tranny and diff mounts?

Thanks a million

Scott 89t2 05-22-02 08:37 PM

fcy1-28-680 front diff $63.90
fby1-39-340 tranny. $11.30 each. need 2.

pd_day 05-23-02 08:39 AM

thanks man

Scott 89t2 05-23-02 11:22 AM

dam it's nice to have a lift and air tools. we changed the front diff mount at my mech. shop in 1 hour. pretty easy. I've heard so many nightmares about that one :D

Green 05-23-02 11:27 AM

are you not replacing the crossmember mount? That is the one that usually goes bad.. The others are just Rubber blocks basically...
The crossmember has a rubber bushing in the middle that can acually TEAR apart, and once that happens you will notice some vibration at idle... Only way to replace the rubber bushing is to replace the whole cross member... Check the crossmember when you replace the Yblock mounts..


All times are GMT -5. The time now is 03:44 AM.


© 2024 MH Sub I, LLC dba Internet Brands