2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

tps- replace?

Thread Tools
 
Search this Thread
 
Old Jul 1, 2004 | 01:46 PM
  #1  
rotarypower86's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
 
Joined: Aug 2003
Posts: 136
Likes: 0
From: FL
tps- replace?

I am thinking that my tps is bad b/c:

1. Doesn't start up right sometimes (drops to idle
in like 10sec)

2. It bucks for a second when you mash the gas
quickly or let off quickly

3. Major power loss from 3900-5600rpm! !
NOT A HESITATION

ANYWAY... Should I take a chance getting a used one, or should I get one new? How much are they? New and used?

Thanks if you can help,
Charles
Reply
Old Jul 1, 2004 | 08:13 PM
  #2  
vaughnc's Avatar
knowledge junkie
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 5,595
Likes: 6
From: Atlanta, GA
Charles,

Well first try adjusting the TPS and see if it's within spec. 2nd a full tuneup with plugs, wires, fuel filter, fluids, etc..

Also check the strainer/filter in the gas tank and make sure it's not clogged.
Reply
Old Jul 1, 2004 | 10:14 PM
  #3  
Falcoms's Avatar
kill it with BOOMSTICK!
Tenured Member: 20 Years
 
Joined: Mar 2004
Posts: 1,227
Likes: 0
From: McHenry, IL
Also, if you look at fc3spro.com, they have a section on adjusting the TPS with a multimeter, which is the most accurate way, as well as a telltale for wether or not you have a bad TPS, somthing the 2 lights cant tell
Reply
Old Jul 1, 2004 | 11:17 PM
  #4  
Full Member
Tenured Member 05 Years
 
Joined: Nov 2003
Posts: 67
Likes: 0
From: Silverdale, WA
Re: tps- replace?

Originally posted by rotarypower86
I am thinking that my tps is bad b/c:

3. Major power loss from 3900-5600rpm! !
NOT A HESITATION
Hey, check and see if the wires to your secondary injectors are plugged in. I had the same power loss problem if i had the gas pushed more than half, after 3500 RPM. Turns out the plug wire to one of the secondary injectors had vibrated loose and was no longer connected.
Hope this helps!

-Cyrus
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
t-von
3rd Generation Specific (1993-2002)
9
Sep 10, 2015 01:56 PM
BLK 93
3rd Generation Specific (1993-2002)
11
Sep 9, 2015 10:56 AM
Frox
General Rotary Tech Support
2
Sep 8, 2015 08:36 AM
Enzo1944
New Member RX-7 Technical
2
Sep 6, 2015 08:57 AM




All times are GMT -5. The time now is 07:47 AM.