Testing s5 rx7 air flow meter
Does anyone have the resistance values for a good s5 na air flow meter?I have a good hunch the afm is bad, and I want to confirm. Car starts idles perfect, but wont accelerate/rev. I was able to test s4 airflow meters before, so Im assuming someone has done it for the s5. Or if someone can link me to a fsm. thanks
-dk |
Ive been searching for FSM to download but with no luck :( A lot of the links are dead. Haynes manual doesnt have the afm test procedure
|
1 Attachment(s)
|
Originally Posted by dkwasherexd
(Post 11017624)
Does anyone have the resistance values for a good s5 na air flow meter?I have a good hunch the afm is bad, and I want to confirm. Car starts idles perfect, but wont accelerate/rev. I was able to test s4 airflow meters before, so Im assuming someone has done it for the s5. Or if someone can link me to a fsm. thanks
-dk http://www.1300cc.com/howto/how2/codes.html |
Probably not the VAF, but you can test for proper voltages. Should be 0.6-0.8v at idle and 4.4-4.7v at WOT. Not sure which pins, i dont have a diagram in front of me.
|
Originally Posted by jackhild59
(Post 11017860)
http://www.rotaryheads.com/PDF/2nd_gen/ |
All times are GMT -5. The time now is 09:17 PM. |
© 2024 MH Sub I, LLC dba Internet Brands