Still having issues, after injectors were cleaned & new fuel filter - -
My original problem was a sudden loss of power around 3500rpm. It felt as though I had lifted my foot up off the pedal, but I had not.. Also, if I really stepped down on the gas, the engine would bog down; the more I pressed, the more the engine bogged down.
It was advised to me that it was possible that my secondary injectors weren't firing, so I had them cleaned, along with a new fuel filter. The problem isn't as bad now, and it has improved - however, it still isn't perfect. Is it possible that it's an electrical problem as well? Or maybe my aux. ports arn't open? Any input would help - still new to the Rotary world. |
Read about the hesitation in the FAQ, about a third of the way down. Likely it's bad grounds.
|
secondary coil not firing ..cold solder joint in ECU..have you checked the trailing plugs (replace?)..wires?..a couple things for ya ..sure others have more..good luck Denholm
|
I'm about to get my injectors clean this weekend. hopefully my help my problem.
but another than that i did all the ground new on my car and it help is you might want to do that again. |
Problem solved!
Rev'd the shit out of it in frustration.. had a huge backfire and shot a nice flame.. now runs like new ! I guess she was just constipated. |
All times are GMT -5. The time now is 07:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands