2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

speedometer cable question

Thread Tools
 
Search this Thread
 
Old Aug 12, 2008 | 09:10 PM
  #1  
RotarySupra's Avatar
Thread Starter
ZOOM-ZOOM Forever!
Tenured Member 15 Years
iTrader: (-1)
 
Joined: Jun 2005
Posts: 512
Likes: 0
From: SoCal/Arizona
speedometer cable question

Its a noob question, but I'm having problems with my speedometer, and I wanna make sure the connecter isn't loose, so where does the connecter end? Transmission? But where exactly? Thank you for your help!
Reply
Old Aug 12, 2008 | 09:32 PM
  #2  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
it connects at the Cluster(behind the Speedo sort of thing..you have to pull the Cluster to get at it there),and it Sneaks from there,through the firewall and goes Down to the Driver's side of the transmission.I think it is a 17 or 19mm(using a wrench).That 10mm nut that you are "going to see"(if you ever get under the car),that holds the Speedometer Gear into the Transmission.you aren't worried about Taking that out/Off Unless you are running different size tires/wheels that make your car's speedo run at a higher or lower actual Posted speed.,then that part gets replaced with a Different speedo gear to Correct the Speed.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM




All times are GMT -5. The time now is 09:58 AM.