Spark Problems
 

We have a 1988 Gen 2 Rx7. The original engine blew an an apex seal so we ordered a new rebuilt 13B. The wire harness was removed completely from the car and then dressed on the new engine. We installed the engine but there was no spark. Theres power to the coils but nothing being put out, and the coils have been checked. So we thought it might be the computer. Replaced that still nothing. Maybe it could be an unplugged wire or blown fuse. No spark. Any Ideas?

87 T2 no spark
 

:sadwavey: I'm having the same promlem with my 87 T2. Let me know if you figure it out. I'll be working on mine again in the morning.
Thanks

If you remove the CAS and spin it (while the key is on) do you get spark then???

No spark
 

No I do not. When I first turn the key on I get 1 click from the injectors when spinning the CAS. I think that I may have got a ECU when I replaced the 2nd one. The coils at .5 L .7 T ohms BR/WHT at boost control 5.1 volts. My first ECU was definatly bad it had 3 buned spots on it.
THANKS