s5 transmission wiring plugs *pic included
Ok, I'm swapping a turbo transmission into an s5 vert. The tranny is s5.
I don't see all the plugs on the tranny that the car has, also it seems like the two round plugs don't really reach, I may have to extend them. Also the square plugs on the tranny have been cut off/smashed. I'm just trying to figure out exactly what they all do. There are 5 plugs, 6 wires total. There are 2 round and 2 square plugs, and one D shaped plug with 2 wires. Are the 2 round "together" or does each one get grounded out? And the 2 square, do they get connected together? or connected to ground? What do they do? Does the "polarity" matter? http://i155.photobucket.com/albums/s...1320111209.jpg Plug A is a female square Plug B is a male Square Plug C has 2 wires comming from it Plug D and E are identical as far as i can tell I know there is a reverse light switch, and a neutral switch, just trying to figure out what is what and how the switches work. Thanks |
Plug D & E Backup Light Switch (Will be round screwed in switch with two points)
Plug A & B Over the Top Switch (Have to look that up) Think this is the 1st/2nd gear indicator, you cant put the cruise on in 1st or 2nd I think Plug C Neutral Switch |
Originally Posted by Rx7_Nut13B
(Post 10862245)
Plug D & E Backup Light Switch (Will be round screwed in switch with two points)
Plug A & B Over the Top Switch (Have to look that up) Think this is the 1st/2nd gear indicator, you cant put the cruise on in 1st or 2nd I think Plug C Neutral Switch I wasn't sure if those got hooked together, or to ground |
Yep, that switch just connects the two wires
|
Go by wire color. Since the 5th gear/reverse switch is all one unit, it's easy to hook up the wires backwards. If your reverse lights come on when you put it in 5th, they're backwards. The white plug should be to the neutral switch.
B/Y & R/G : Reverse switch (FSM page Z-28) B/L & B: 5th gear switch (FSM page Z-32) G/B & B: Neutral switch (FSM page Z-32) |
Originally Posted by RotaryRocket88
(Post 10862277)
Go by wire color. Since the 5th gear/reverse switch is all one unit, it's easy to hook up the wires backwards. If your reverse lights come on when you put it in 5th, they're backwards. The white plug should be to the neutral switch.
B/Y & R/G : Reverse switch (FSM page Z-28) B/L & B: 5th gear switch (FSM page Z-32) G/B & B: Neutral switch (FSM page Z-32) |
Originally Posted by RotaryRocket88
(Post 10862277)
If your reverse lights come on when you put it in 5th, they're backwards.
|
All times are GMT -5. The time now is 03:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands