s4 t2 lsd ????
i got a s5 vert and i also got a s4 t2 with no engine or trans will the lsd outta the t2 bolt up to the s5... ive herd u gotta have a driveshaft made to fit it im wantin a lsd and just seeing if i can use what i got????
|
fc gurus where you at?
|
Yes it will bolt right up as long as you use the half shafts also. You can have holes drilled in the flange to fit the n/a driveshaft or you can get a custom driveshaft. Or you can say to hell with it and put in a TII transmission and all that goes with it.
|
No, it won't just bolt up. The driveshaft flange is not the same as on an NA diff. You would need a custom driveshaft with an NA yoke & a TII diff flange. Mazdatrix offers them, but you have to call for details.
Drilling out the holes on the NA diff flange is a great way to get an unbalanced setup. |
well i got a driveshaft from mazdatrix it should go in this week i also got some derlin diff bushings
|
Originally Posted by andycivic
(Post 9696967)
well i got a driveshaft from mazdatrix it should go in this week i also got some derlin diff bushings
Also, if you bought a used S4 LSD, the clutch plates are probably worn out. So if you drive it and feel little if any LSD function, that is why. The rebuild parts are about $700. |
I'm in a similar delima. I have access to a S4 TII diff. I have heard that you can change the the pinion flange for the driveshaft. Is this true?
|
I customized a n/a driveshaft to fit my t2 rear end. Didnt take long at all with a hacksaw and die grinder.
|
All times are GMT -5. The time now is 02:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands