RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Is an RB turbo-back enough reason for a walbro fuel pump? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/rb-turbo-back-enough-reason-walbro-fuel-pump-213130/)

RX7.0 08-10-03 12:13 AM

Is an RB turbo-back enough reason for a walbro fuel pump?
 
Is an RB turbo-back enough reason for a walbro fuel pump?

I need a fuel pump regardless. Just wondering if the walbro is too much considering that the exhaust is my only mod so far.

Sorry if this is a repeat, but I've already spent 1.5hrs searching.

Any recommendations/comments?

tancred 08-10-03 12:25 AM

Id be interested to hear this response as well, I have the turbo back exhuast, new turbo, intake.....and am probbably hitting 11 psi....might add a pump to my list soon depending on the responses here

RX7.0 08-10-03 12:28 AM


Originally posted by tancred
Id be interested to hear this response as well, I have the turbo back exhuast, new turbo, intake.....and am probbably hitting 11 psi....might add a pump to my list soon depending on the responses here
Sounds like you and I are in the same boat....cept the intake. (new turbo will be done in 2 weeks :)

gsracer 08-10-03 12:28 AM

yes

RX7.0 08-10-03 12:30 AM


Originally posted by gsracer
yes
won't run too rich?

gsracer 08-10-03 12:39 AM

Yes, you'll run rich, but it's much better than the alternative.

After owning a turbo II for a while, there are many things I wish I had done differently. The very first thing you need to decide is how far you're going with the car. If you're going to be content with 225-235 rwhp you'll get along just fine with the walbro, safc, and some 720's just for safety.

I ran just the walbro in 11-12 pounds of boost for over 6 months without a problem. In fact I had the car dynod, and it was actually in the mid 11's for a/f ratio. Every car is going to be different though.

With just the walbro you will run rich, your gas mileage will probably decrease a little bit as well. However, it gives a bigger safety net, and the stock pump is one of the first things you'll need to upgrade as you start putting down more power and runing more boost.

Scott 89t2 08-10-03 01:11 AM

depends on the boost level. most likly yes

it's also posible the pump alone isn't enough

tancred 08-10-03 01:17 AM

Then A PUMP it is...and some injectors......

krazydru784 08-10-03 02:07 AM

and a way to control those fuel upgrades lik a piggy back, such as the safc, or an fcon, or a standalone

krazydru784 08-10-03 02:08 AM

o yea ur going to need a fuel cut defender as well

hondahater 08-10-03 08:34 AM

what does a fuel cut deffence look like?

West TX RX-7 08-10-03 11:45 AM

the walbro would be one of the first upgrades I'd make. I didn't make that upgrade after installing my exhaust, intake and fuel cut defenser and it leaned out at 8k one day screaming down the hwy and blew an apex seal on a 25k mile engine.

Get the Fuel Pump Now!!! :D

adamlewis 08-10-03 12:00 PM

Yes. You need a pump. My friend blew up his engine running the RB turbobkack + FCD. After that he put in a Walbro and an AFC and it ran fine. He did lean it out some with the AFC though so Im sure youll run plenty rich with the Walbro and stock injectors.

REFLUX 08-10-03 12:16 PM

won't he need a fuel pressure regulator as well??

cloead 08-10-03 12:20 PM

Ew I was about to order the rb turbo back and fcd.. but I don't want my engine going boom so maybe I'll hold off untill I have enough money for a walbro... =/

RoToReX7 08-10-03 03:31 PM

RB turbo back+FCD+SAFC+walbro 255=:)

RX7.0 08-10-03 05:05 PM


Originally posted by RoToReX7
RB turbo back+FCD+SAFC+walbro 255=:)
Apexi Super AFC?

Any recommendations for an intake?
(might as well break the bank all at once)

RX7.0 08-10-03 05:14 PM

Better yet, would someone like to just give me a reasonable shopping list?
I have the RB turbo-back, FCD, and my turbo is being rebuilt.
Which of these do I need: Fuel Pump, injectors, SAFC, intake, fuel pressure regulator?
Any recommendations on brands/models would help.
I'm not looking to build a monster, just something I can be proud of :)
Thanks.

krazydru784 08-10-03 05:38 PM

ok for ur setup i dotn believe u really need a fuel pressure regulator..wat u should have are some 720 secondaries..greddy makes some affordable ones..ull want a walbro 255, an safc or hks fcon...but on a budget just go with the safc..check ebya for some great deals on those..and for an fcd there is a guy who sells one really cheap that he makes himself and ive heard they are even better then the onesmade by racing beat and mazdatrix etc. so u can check that out. have fun blowing ur budget :)

RX7.0 08-10-03 08:02 PM

sounds like a plan
thanks for the input!

RX7.0 08-12-03 08:47 AM

OK, i'm not big on injectors. There are 2 secondaries, right?

Bukwild 08-12-03 12:28 PM

they have walbros on ebay for 98 bucks. Just be carefull not to strip out the screws getting the plate off.
98 bucks is worth it

adamlewis 08-12-03 01:28 PM


Originally posted by RX7.0
Better yet, would someone like to just give me a reasonable shopping list?
I have the RB turbo-back, FCD, and my turbo is being rebuilt.
Which of these do I need: Fuel Pump, injectors, SAFC, intake, fuel pressure regulator?
Any recommendations on brands/models would help.
I'm not looking to build a monster, just something I can be proud of :)
Thanks.


If youre just going to run the car with the RB turbo back and nothing else, all you need is the FCD and Walbro. I ran my car that way for a while and never had a problem.
If youre gonna get an intake I would add an AFC on to that order.
If youre going to do exhaust, intake, AND turn up the boost a little more yourself, Id definitely get some larger injectors also.

RX7.0 08-12-03 07:23 PM


Originally posted by adamlewis
If youre just going to run the car with the RB turbo back and nothing else, all you need is the FCD and Walbro. I ran my car that way for a while and never had a problem.
If youre gonna get an intake I would add an AFC on to that order.
If youre going to do exhaust, intake, AND turn up the boost a little more yourself, Id definitely get some larger injectors also.

Now that's what I was looking for, thanks

dr.jones63 08-12-03 08:59 PM

I have a 89 T2 and I have a walbro, an apexi intake, a fcd, and a RB exhaust from mazda trix. My experience is your fuel economy goes way down, like 33%. I know its running rich and in cold weather it runs like the choke is on. Im thinking I really need the safc.

Did you guys set yours up yourself and what are the recomended settings ?


All times are GMT -5. The time now is 04:47 AM.


© 2024 MH Sub I, LLC dba Internet Brands