Post your sweet interior setup (gauges ect)
 

Hey guys, just bored, and wanted to see some nicely done interior setups. Weither it be gauge and pods or whatever. I just want to see them. Thanks!

http://bling.imperial.org/ProjectTII/interior4.JPG

http://bling.imperial.org/ProjectTII/interior3.JPG

I still need to get a peice of plexi or al. and make my stereo surround.. I'll see if i can fit my Profec B and Turbo Timer with maybe a 60mm coolant gauge.. or it'll just be the TT and Profec B side by side under the cd player. think i'll get a DASH unit and ditch the hand controller some time too hehe

I found that with an installation kit for the cd deck the unused space under the deck can be put to use with 2 to 3 smaller gauges. I only have 2 in there but i could have fit 3.
https://www.rx7club.com/forum/attach...postid=1762229

I don't want to put really important gauges that low.. like boost or what not.. i like to keep my eyes higher up when driving :) I'll get the p/h/w coolant so it just lights up if i'm in trouble

I dont mind having to glance around for my gauges. When I get an a piller panel I can install my gauge pod and put two more there. I can mount my turbo timer...somewhere, when I get the harness. I think I'll make a panel to replace the center ac vents when I get an electronic boost controller. An I can just mount the Safc above that on top of the dash at a slight angle to make it accesible and easier to read from the driver's seat.

Thats my plan, for now.

I Think im going to mount my Dash Unit on the steering wheel cover, infront of the tach. I still have yet to mess with it.

i was thinking about double siding it to the glove box... i honestly only look at it for the water temp.. and then to scroll my log min/max. my bad you said dash not hand controller haha

I figured if i had the Dash it'd go basically in front of the idiot lights

I would put mine there, but ive got a gauge pod right above the idiot cluster.

I have my dash unit infront of the idiot lights.

http://www.nopistons.com/forums/uplo...1051406407.jpg

http://www.nopistons.com/forums/uplo...1051406176.jpg


Whats nice about defi gauges is their link system, so if I ever decided to mount some guages real low, all their warning lights are connected, so if one goes beyond the peak setting, they all go off :)

I don't have pictures of mine right now, but I have the dual pod on the a pillar with my boost and egt, exactly like bl|nk, except that I have my boost in front of my egt. Same Greddy guages too. :)

I then put my Greddy a/f guage with my afc down where my ash tray used to be. I'll be putting my profec B in the din below my tv. See, the guy that installed all my tv/stereo/guages/TT/afc is a custom installer and he can work just about anything out of glass or whatever.

So I'm dumping the stock surround-the whole piece that surrounds the vents and deck, and he's custom fabricating one that will better fit my tv + profec and also my afc & a/f guage. He's also going to incorperate a power adapter for my ps2. It's setting me back about 200 bucks. Dude is awesome though. He did my custom kick panels, which are the best on earth. When it's all done, I'll drop some pics in for you guys.

-Kanaida

here's mine. :) bad pic though:(

Ive got mine setup like big retards. Water temp, oil temp and oil pressure are going there. My boost gauge is sitting in the drivers demister grill until I go buy a pod lol. Although Im going to find a 3 gauge pod for the pillar, and put an electric fuel pressure, EGT and boost there.

I've got the same setup as everyone else. I want some mickey mouse ears for it, but I can't find them :(

I sent you mount for the boost gauge!! :P

You mean these ones?

http://www.corksport.com/content/00/...ges/473450.jpg

The Border carbon fiber meter panel is available for either 52mm or 60mm gauges. Please note that the panel is made for a right hand drive car and it require very minor trimming on the edge that meets the windshield to match the contour of the left hand drive cars.

http://www.corksport.com/main.php3?p...3Fcat%3D214913

doesn't cs make a knock off of the border for way cheaper?

That piece of shit didnt work :p:

never said it would work.. it came with the gauge when i bought it and never bothered to use it ;)

Here is my old dash....

And a newer pic with the carbon stuff. (sorry about guages, they reflected the flash!)

This isn't my car its racingbeats Bonnivle race car, it is a sweet set up though (too many gauges possibly). Sorry bout the big pic.
http://www.16paws.com/Events/SevenSt...x_small241.jpg

Yo,


Sorry, no extra gauges...yet!

https://www.rx7club.com/forum/attach...postid=1367540


I might be getting a 60mm GReddy EGT gauge at some point in time.

Kevin
1989 GTUs "Hit a buck twenty on the way to work..."

Hey Kevin, are those Sparco pedals as well? Those are hot! nice alluminum, and no brand name on the front. Those are sweet. How much and what manufacturer?

-Kanaida

Damn retard head....your car is running hot! j/k

Yo,


They were custom FC pedal sets made by Sled Driver here on the forum:

https://www.rx7club.com/forum/showth...hreadid=131249

His dickhead bosses at the shop he works at said he can't make any more...so they are unavailable. Sorry mang!

Kevin
1989 GTUs "Custom pedals up in this hizzouse!"

here are some pics of the interior with some nice pedals I got from somebody on the forum, not sure if it's the same person...I doubt it.
http://mysite.verizon.net/antoniog/s...g.w300h225.jpg
http://mysite.verizon.net/antoniog/s...g.w300h225.jpg

Here's one of mine

http://webpages.charter.net/csanches/driverint.gif


LoS

Where do I buy that steering wheel mount for my boost gauge? What brand is it and will it fit a DEFI gauge?

https://www.rx7club.com/forum/attach...postid=1762680

Scott

hahaha. I just bought one of those VDO gauge things from NAPA, and mounted it up there. its not some kind of special pod to mount it there, although I know, it does look that good.:D its a tight fit. and I screwed it up at first, and it rubbed the steering wheel a little when I turned it, then I managed to squeeze it back another like 2mm........... or I could have gotten a new steering wheel. :)

BTW, it was $3.99. it should fit any 2 1/16 gauge. (I think)

also, I want to see some more interior set ups. :)

http://photo.msn.s8.com/MS8zLzEwNTM1...jmYCc$/jpg.jpg

seee if this works . and gauges coming soon

After seeing all these nice, clean looking interior shots, I am embarrassed to own my RX now. My interior is shot. Carpet is faded and has some tears from previous idiots (I won't call them owners, they abused it too much).

Plus my seats are stained (again from idiots) and the vinyl dash is lifted along one edge with some screw holes from something being mounted there previously.

Mechanically sound though....

krazyrdu, by far my fav. verrrrry nice.

We should start a thread, 'post your ugly interior setups'

No offense to those that have it, but I am SO glad my car doesn't have that ugly 2-spoke steering wheel.

Here's a shot or two of mine...

I've only bought gauges, haven't done anything else. Well, floormats.

http://homepages.wmich.edu/~m1goebel/esad2.jpg

:eek:

http://www.teamfc3s.org/forum/member...php?img_id=113

Here's mine. If the pic doesn't load (Geocities) then you can see it on the web site in my sig.

http://www.geocities.com/kllntyme9/rx-7_interior.jpg

yes. the ugly 2 spoke wheel should DIE!!!:ak47:

I picked up a 3 spoke locally for $25. :)

Ill have a sweet interior shot soon. The car is falling together as we speak.

WOW!!!


I really like that interior! Little heavy on the white accents, but thats really CLEAN!!

Jarrett

Is that a fucking 6x9 in the door!

God the horrid sounds of a non-circular speaker.

I just think its clean...A little whacky on the whole white on black thing. But very clean. I would probably consider doing something like that on a lesser scale.

damn i liike that
what kind of apint did you use to paint all of that losRx7?????

i was suppose to do something similar to that but cant find the right paint and hae to getr my interrior immaculate
your interior is cleannnnnn

my interior pieces are accented to match the outside color of my car too...but my car is black :D.

which cars came with the shifter that has the gear numbers in white writing?

i moved the 6x9 to the front because they responded better, and sounds better in free air then the 6 1/2s. I put the 6 1/2 enclosed behind the seats, but high enough were u can hear them. Sounds mint.

Pushed near 145db this weekend, but i learned my enclosure is for everyday use, not an SPL box. Hopefully by the end of June, i'll pass 150 db.

any1 wanna get rid of that 2 spoke steering wheel? i got a 10th anniversary stock steering wheel for sale. great condition. http://community.webshots.com/user/krazydru784

go to parts for sale.
55 obo