Piping questions...
Two questions
1.) The metal pipe right next to the turbo oil supply metal pipe. It's like parallel and welded to each other. 2.) The heater hose on the passenger side(right) on the radiator and somewhat in the middle. I guess it's either the supply or return for the heater but which pipe does it hook up to? Thanks |
Originally Posted by HITMANEM2
1.) The metal pipe right next to the turbo oil supply metal pipe. It's like parallel and welded to each other.
It's from the "purge valve" and charcoal canister. It takes all the nasty vapors and runs them right before the turbo - this area is always under vacuum, so the vapors get sucked in from there and burned in the engine. 2.) The heater hose on the passenger side(right) on the radiator and somewhat in the middle. I guess it's either the supply or return for the heater but which pipe does it hook up to? It hooks to a hose that Y's into the lower rad pipe. If stock, it's a 90-degree rubber hose about 1/2" in diameter. -Ted |
stock heater hose is 5/8th? or is it 1/2 inch in diameter?
can someone pls clarify? |
5/8" rings a bell.
1/2" sounds too small? -Ted |
thanks ted for clarifying that,
Key words for searching: 5/8 inch heater hose size core radiator replacement |
All times are GMT -5. The time now is 06:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands