Pieces parts ...
Some pics of a few of the parts I have lying around my downstairs office.
Fluidyne Radiator and Perma-Cool Radiator https://www.rx7club.com/members/imag...parts/rad1.jpg https://www.rx7club.com/members/imag...parts/rad2.jpg Aeromotive 1000hp fuel pump, Aeromotive 1000 fuel pressure regulator, and SX Racing Billet fuel filter - all with -10# inlets https://www.rx7club.com/members/imag...ts/fuelsys.jpg Racing Beat sway bar and endlinks https://www.rx7club.com/members/imag...ts/swaybar.jpg https://www.rx7club.com/members/imag...arts/links.jpg Mazdacompetition camber/caster plates https://www.rx7club.com/members/imag...rts/plates.jpg Greddy TypeR BOV https://www.rx7club.com/members/imag.../parts/bov.jpg My rear end after I dropped the entire diff and subframe, put new bushings in and repainted everything. Crappy pic, but you get the idea. There's a Mazdacomp rear camber link in there ... but you can't see. https://www.rx7club.com/members/imag...ts/rearend.jpg And last, a pic of the dash hacked up with the climate control stuff at the bottom and my Greddy Profec-B boost controller. https://www.rx7club.com/members/imag...parts/dash.jpg |
yo, did you need to do anything else special to move the logicon on the bottom? or just push the bastard down:D ?
|
There was a metal support brace that had to be removed in order to give the wires for the logicon enough length to reach. It was a BITCH to get out since I don't have a sawzall. I basically used a 8 pound sledge and a crowbar.
|
Originally posted by BOOSTD 7 There was a metal support brace that had to be removed in order to give the wires for the logicon enough length to reach. It was a BITCH to get out since I don't have a sawzall. I basically used a 8 pound sledge and a crowbar. |
Very nice. Any more cool pics to share?
|
Hey Boostd7 - Are those Mazdacompetition camber/caster plates something that carries a Mazda part no.? They look like they'll work with regular springs instead of coilovers.
Thanks. |
so you are selling this stuff? Or did you just want to show off what you have laying around? J/P
|
the fluidyne and the fuel gear are gettin me hard :mspank:
|
Node,
Bro, if that's the case you need to get out more. ;) |
The stuff isn't for sale ... it's waiting to go on the car. But since I don't know when my motor is coming, I'm in no hurry.
I don't think those camber plates would work with regular springs. Most regular springs are to big around. |
hey Boostd, I have been trying to get in touch with you, check your e-mail.
|
All times are GMT -5. The time now is 01:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands