Pics of my Engine almost done
 

Well I added the Vac stuff,wiring harness, and fuel lines today.

I also put on my UIM but didnt take pics.

I have removed the Vack Rack but kept the PCV and Hotstart solenoid.

http://images.cardomain.com/member_i...07_16_full.jpg

http://images.cardomain.com/member_i...07_17_full.jpg

http://images.cardomain.com/member_i...07_18_full.jpg

http://images.cardomain.com/member_i...07_19_full.jpg
Above you can see where I relocated the single solenoid left.

http://images.cardomain.com/member_i...07_20_full.jpg


http://images.cardomain.com/member_i...07_21_full.jpg

This is where I relocated the PCV. I used the S5 oil tube which the S5 boost solenoid is on. It made a good mount.

Looking good!

keep posting ur progress

yeah keep us updated. looks nice!

nice work

http://images.cardomain.com/member_i...607_1_full.jpg My baby which the 13bt is going in. 88 GTU

The Jspec core engine I used.
http://images.cardomain.com/member_i...607_4_full.jpg

http://images.cardomain.com/member_i...607_6_full.jpg
The engine after I got it from Kevin (Rotary Resurrection)

http://images.cardomain.com/member_i...607_7_full.jpg
Pulling the NA Blown Coolant seal engine.

http://images.cardomain.com/member_i...607_8_full.jpg
Bad engine pulled.

My polished manifolds
http://images.cardomain.com/member_i...07_14_full.jpghttp://images.cardomain.com/member_i...07_15_full.jpg

I still have to fab up a Oil Drina line for the turbo with some SS hose but I should be running by this weekend.

hey digi where did you get those polished at

I polished them myself. I didn't do a job as good as a pro would have but it came out pretty good.

I used something like 120 grit,300,600,1000 then I went over it with a buffer and polishing compound.

They are a huge improvement over the rusted,sea salted color it was before. BTW it's a S5 Jspec manifold

Looks good!

At first the Red housings and Blue hose were looking nasty but it's coming together pretty well.

I painted a bunch of parts with 500` Silver engine paint and then sprayed a Metal Cast Blue Anodize paint over the parts which wouldn't see a lot of heat.

The stock oil cap is being replaced by my Atkins Rotor cap though! :)

I also painted my pulleys.

I didn't paint the insides of the waterpump one but got lazy and sprayed all the rest.

I expect the paint to be removed by the belts where needed in due time.

Oh and yes that's my really expensive engine stand(aka junk tire) ;) Since I have the manifold on I can hoist it up with an engine puller now.

Looks really good. Original colors aswell.

http://images.cardomain.com/member_i...07_22_full.jpg
My Banged up TMIC. I am going to have to work on that damn dent on the intake.

http://images.cardomain.com/member_i...07_23_full.jpg

http://images.cardomain.com/member_i...07_24_full.jpg

http://images.cardomain.com/member_i...07_25_full.jpg
I've done the coolant removal and secondary butterfly removal on my TB and Have painted the BAC Blue as well. You can kind of see it in the back.

That is damn patriotic :D

very nice :drool:

http://images.cardomain.com/member_i...07_26_full.jpg
My AN Stainless Steel braided oil return line.

http://images.cardomain.com/member_i...07_27_full.jpg

http://images.cardomain.com/member_i...07_28_full.jpg

http://images.cardomain.com/member_i...07_29_full.jpg

http://images.cardomain.com/member_i...07_30_full.jpg

http://images.cardomain.com/member_i...07_31_full.jpg

http://images.cardomain.com/member_i...07_32_full.jpg

Finally got the engine in the car today. Took me about 6 hours due to small problems.

I am going to hook up the fuel/oil/vac lines soon and then put the koyo "bling" radiator in.

Hopefuly it will run this week.

Oh yeah. By accident the damn engine came crashing down while half hoisted over my car!!! It mashed my hood rod and dented my passenger headlight cover a bit. That just means I have to get the CF air scoop cover along with my CF FC3S TII hood. :)

Way to look at the bright side- and that is some kickass looking motor you got there. NIIIICE. :D

:mspank: :worship:

Sweet. Hope to see you at a drift event soon ;)

looking good.

that engine looks sweet

the engine looks pretty damn good

Very nice Corey, its looking really good.

Looks like you're gonna have it ready for the Prescott drive after all.

awsome! i want one!

very nice 13b

Hopefully. :)
I want to try and get on a dyno and see what the AFR's are so I can be sure I won't detonate. This is my daily driver and cannot afford to pop the engine.

Although I figure I'll be fine since I have cleaned and tested 550's and a Walbro.