RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Parts needed. Is there any place better than MazdaTrix?? (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/parts-needed-there-any-place-better-than-mazdatrix-837801/)

Wee Willie 05-05-09 06:09 PM

Parts needed. Is there any place better than MazdaTrix??
 
I need a Left Outside door handle for a 1988 Rx7 in Sunrise Red. The color code is RH. MazdaTrix wants $108.52 for it.

Is there a better place to get a new one, or, is there a reliable place to get a used one? I live in the Seattle area if that matters.

Thanks,

Don

jimmy_trader 05-05-09 06:13 PM

eBay

or forum parts section

~j

HAILERS 05-05-09 07:10 PM

Or repair it using J-RAT fix. Search for J-RAT and the term door handle.

Junk yards sell 'em for ten bucks or less.

Mazdatrix is a dealer just like the one near YOU.

Wee Willie 05-06-09 02:31 AM

I tried repairing it but I'm afraid that it's toast.

I can't even find a junk yard that has any rx7 stuff at all.

Thanks

bschnard 05-06-09 09:47 AM

Try these guys for used parts. You can search the entire country and all will ship something like the door handle pretty cheaply.

http://www.car-part.com/

I found a complete quarter panel using them and several other parts including a limited slip shipped very reasonably.

Wee Willie 05-06-09 03:29 PM

Thanks bschnard, I located a local wrecking yard that has a couple 2nd gen RX7's. They don't have the correct door handle but they might be able to help me with some other "stuff".

Thank you

Aaron Cake 05-06-09 04:24 PM

Mazdatrix's prices are generally in line or a bit lower then the dealer price. Most of our parts are still available at the dealer.

Gene 05-06-09 06:57 PM

Give Ray at Malloy Mazda a buzz, he's a big help to the RX-7 community and a great guy.
(703) 490-8170‎

Wee Willie 05-06-09 07:14 PM

MazdaTrix's price of $108 was definitely better than Lynnwood Mazda (local delear) which wanted from $175 to $195 for the door handle depending on options. i.e. plain, key light or alarm.

I think they are not my friend. :-(

Don

arghx 05-06-09 09:19 PM

+1 for Ray Crowe and Malloy.

AUGieDogie 05-08-09 05:12 AM


Originally Posted by Wee Willie (Post 9187610)
MazdaTrix's price of $108 was definitely better than Lynnwood Mazda (local delear) which wanted from $175 to $195 for the door handle depending on options. i.e. plain, key light or alarm.

I think they are not my friend. :-(

Don

Lynnwood mazdas prices suck! That and there parts guy doesn't know shit. I just needed the crush washers for the turbo hard lines. Ordered, wrong ones, ordered again wrong again. I went up to Everett mazda, and the guy pulled them outa the back in like two minutes. AND they were cheaper.

On a good note there incompetence has gotten me a couple of free double ordered parts over the last 15 or so years.:)

AUGieDogie 05-08-09 05:16 AM

Oh and black dragon often has stuff cheaper then mazdatrix. Sometimes its the other way though.

Wee Willie 05-09-09 06:03 PM


Originally Posted by AUGieDogie (Post 9191921)
Oh and black dragon often has stuff cheaper then mazdatrix. Sometimes its the other way though.

Thanks AUGie, I had never heard of Black Dragon before.

Gene 05-09-09 06:40 PM


Originally Posted by Wee Willie (Post 9195308)
Thanks AUGie, I had never heard of Black Dragon before.

They used to be Victoria British.

thejallenator 05-10-09 07:34 PM


Originally Posted by Gene (Post 9195365)
They used to be Victoria British.

black dragon is owned by the same group of people that also put out the LMC truck magizines.. good people. they have it all. although not always the cheapest.. but some stuff is just expensive no matter what

incubuseva 05-11-09 12:49 AM


Originally Posted by AUGieDogie (Post 9191921)
Oh and black dragon often has stuff cheaper then mazdatrix. Sometimes its the other way though.

+1 They rock.


Although I'm not a fan of Mazda of Everett..... Only cause they didn't give me a job when they opened :( I went in there 4 times before they opened!


All times are GMT -5. The time now is 12:10 PM.


© 2024 MH Sub I, LLC dba Internet Brands