P Port machine shop
Anyone know of a good machine shop that can handle porting some housings? I'm near Charleston, SC and I travel to Jacksonville, FL alot too.
|
Might want to try one of the regional sections.
|
Originally Posted by Slevin_FD
(Post 9129209)
Anyone know of a good machine shop that can handle porting some housings? I'm near Charleston, SC and I travel to Jacksonville, FL alot too.
787-313-5574 Naranjito, PR One of the best machine shops in PR! |
i would call atkins/mazdatrix/pineapple racing. i'm sure one of them has the hook up.
|
I'm using the machine shop at a local college for mine..
But you could get away with any good machine shop as long as you are very clear about your project. |
anyone have the measurements needed for a good port. This is going to be my first time trying this. they are extra housings, but still......
|
there is a good thread over in the rotary performance section about making p-port housings
|
Originally Posted by Slevin_FD
(Post 9130325)
anyone have the measurements needed for a good port. This is going to be my first time trying this. they are extra housings, but still......
Is it NA or turbo? if you are doing it in a machine shop, you should take advantage of your ability to make your port any shape you want.. not just a round hole. |
Originally Posted by Slevin_FD
(Post 9130325)
anyone have the measurements needed for a good port. This is going to be my first time trying this. they are extra housings, but still......
I gave you one of the best machine shop, if not the best when it comes down to rotary engine. You should've mentioned that it was all a pipe dream from the get go :rolleyes: |
All times are GMT -5. The time now is 10:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands