Order of Injector Clips
I didn't really look too far into my FSM... but I need to know the order of the injector clips. I'll try to be more specific. I took off the clips to swap in another engine, and like an idiot didn't label them. I just need to know which clip goes where from the harness to the injector.
|
3 Attachment(s)
Originally Posted by dwb87
I didn't really look too far into my FSM... but I need to know the order of the injector clips. I'll try to be more specific. I took off the clips to swap in another engine, and like an idiot didn't label them. I just need to know which clip goes where from the harness to the injector.
|
Actually it's a TII S4... I'll just look a little harder into my FSM I guess. Thank you for the effort though.
|
They all have differnet lengths. Did you cut close to the clips? If so, lay the wires out from the drivers side of the block.
Wait, go do a ohm test on the positive of each injector from the cpu. That will tell you what you need to know. |
All times are GMT -5. The time now is 07:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands