now problems with my front iron :( w/ pics
 

The closer I get to assembling the pickier and more issues I find....another porting screw up?? Also does this water jacket look questionable? there's still material on the side to support the seal.
http://img254.imageshack.us/img254/4129/portma.jpg
By schctrg at 2012-06-23

http://img205.imageshack.us/img205/812/waterjacket2.jpg
By schctrg at 2012-06-23

http://img842.imageshack.us/img842/8...terjacket1.jpg

I slightly touched the outer control ring... This was from the first time I ported everything, I completely destroyed my center and now have a new one, ported successfully.

Those ports are usable. Not good, but usable.

As for the water jacket, I hesitate to give advice without clearer pictures. You need better lighting and a real camera, not a phone.

Higher Res picture of issues. Help please.
http://img16.imageshack.us/img16/5158/img3948p.jpg
http://img818.imageshack.us/img818/8687/img3947tz.jpg
http://img99.imageshack.us/img99/7522/img3946j.jpg
http://img822.imageshack.us/img822/6408/img3945p.jpg
http://img835.imageshack.us/img835/8707/img3944as.jpg

let me know if anyone needs better pictures

https://www.rx7club.com/2nd-generation-specific-1986-1992-17/will-iron-work-989350/

Hopefully that link works. My iron had a similar issue although not as bad. Measure it with a set of calipers and see how much material is actually there.

+1 on the link and info contained within. I feel like this needs to be a more widely known repair since it's quite an easy fix and the problem seems to be so common.