Need help interpreting error codes
Need help interpreting error codes
Hi all,
My car threw a CEL a while back and I finally got around to pulling the codes. The car seems to run fine.
It's an S5 Turbo with the air pump and the AWS deleted.
These are the codes:
11 25 30 31 32 33 34 38 42
The CEL came on after i popped a hose coupling off because I hadn't tightened the clamp enough.
Any ideas?
11 - Intake Air Thermosensor (Engine) - Intake air fixed at 68F
25 - Solenoid, Pressure Regulator Control
30 - Solenoid, Split Air Valve
31 - Solenoid, Relief Valve
32 - Solenoid, Switch Valve
33 - Solenoid, Port Air Valve
34 - Solenoid, Bypass Air Control (BAC) Valve
38 - Solenoid, Accelerated Warm-up System (AWS)
42 - ???
Maybe i need to double check that last one..
My car threw a CEL a while back and I finally got around to pulling the codes. The car seems to run fine.
It's an S5 Turbo with the air pump and the AWS deleted.
These are the codes:
11 25 30 31 32 33 34 38 42
The CEL came on after i popped a hose coupling off because I hadn't tightened the clamp enough.
Any ideas?
11 - Intake Air Thermosensor (Engine) - Intake air fixed at 68F
25 - Solenoid, Pressure Regulator Control
30 - Solenoid, Split Air Valve
31 - Solenoid, Relief Valve
32 - Solenoid, Switch Valve
33 - Solenoid, Port Air Valve
34 - Solenoid, Bypass Air Control (BAC) Valve
38 - Solenoid, Accelerated Warm-up System (AWS)
42 - ???
Maybe i need to double check that last one..
Joined: Mar 2001
Posts: 31,796
Likes: 3,210
From: https://www2.mazda.com/en/100th/
i would check the air temp sensor on the engine, code 11 that is important. the other codes are the ones it'll throw when you remove the emissions equipment.
Thread
Thread Starter
Forum
Replies
Last Post
SakeBomb Garage
Group Buy & Product Dev. FD RX-7
8
Oct 9, 2015 10:05 PM







