Need help about sunroof
My sunroof doesn't want to move from the drivers side. Is there a way to dismount it from the inside? What the problem may be?
|
You need to remove the sunroof. First take out the headliner conver for the sunroof. Is holded in place by a few plastic clips. The using a 10mm socket remove the bolts from the sunroof. Take the sunroof out the car. Then lubricate the rails in the car with some kind of lubricant like WD-40. You need to clean the rails and remove the dust and dry grease from there. WD-40 works great here. After a good cleaning, place the sunroof back and try again to see what happen.. This method resolved the same problem like yours that happened in my car. A lot of dirt and dry grease in the rail channels.
|
it doesn't open. Still do the same procedure?
|
Pop the little circular Cap on the Headliner,In the Car's Roof..This will reveal an Allen type Hole that you put either an Allen Key or Similar socket into.That will allow you to Open and close your Sunroof Manually.Honestly If the Roof won't Budge by doing that,then the tracks and cables(yes Cables) are Corroded,and that would require you to Pop the Headliner,and Pillar stuff,Etc to Drop the Sunroof..It will come out,with a 10mm Socket,and a Phillips screwdriver, as ONE Big Lump of Sunroof Skeleton and the sunroof Skin,Motor and all!
|
try tu push upward and to the rear the sunroof at the time that you open it.
|
sooo i have the same problem.... But the weird thing was, it was working one day Then i cleaned it and lubed it. then like 2 weeks later one side became stuck. I tried turning the nut but it didnt help anything. I need to know what i should do. I got no problem droppin the headliner, but i got no clue how(im a DIY-er) so yea any help?
~TDR |
Will do all on Monday. I'll let know about progress
|
There are some instructions in the FSM for removal of the sunroof mechanism which you can download in the FAQ section. Might not be a bad idea to print them out and have them handy for your project on Monday. Good luck with it.
|
can u post link for me of the FSM area? tnks...
|
You will have to break it all appart and hopefully with a lot of lubricating liquid it will break lose in the channel where the motor turns the spiral, Good luck!
|
Originally Posted by Joe13BT
(Post 8159397)
can u post link for me of the FSM area? tnks...
https://www.rx7club.com/2nd-generation-specific-1986-1992-17/frequently-asked-questions-2nd-generation-rx-7-faq-fc-494667/ |
Mine is doing something similar. So, would like to know how you resolved the issue. Keep us posted.
|
All times are GMT -5. The time now is 03:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands