RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   my rx7 wont start?! Help plz! (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/my-rx7-wont-start-help-plz-690637/)

TriforcePowered 12-04-07 04:40 PM

If it cranks you have a different problem, did you try deflooding, you might be flooded, there's lots of people with advice on that, it's helped me a lot already.

farberio 12-04-07 04:44 PM


Originally Posted by TheMafia (Post 7583676)
okay... I seem to be having "kind of" the same problem..
i need to figure this out badly...
the 7 was working yesterday just fine.. i go to leave and it won't turn over
I have:
New engine
New tranni
New battery
New Coil Igniter
New fuel pump
did an oil change
cleaned out spark plugs

it cranks but won't turn over.. need help!

88 fc n/a GXL

Fyi, if it cranks it turns over.
It can turn over and not start, which appears to be what you are having.

If you have a rebuilt engine, they are hard to start for the first 1000miles or so.
Try deflooding procedures a couple times.

TriforcePowered 12-04-07 10:04 PM

So I found the clutch switch, seems the clutch doesn't push it down all the way when it down, if I push it with hand, car starts fine (not a fun way to start the car). Does anyone know how to adjust this switch?

TriforcePowered 12-10-07 09:08 PM

So it's not adjustable, it was just bent, but I was able to bend it back. So it's good for now.

texFCturboII 12-10-07 09:10 PM

yea!!!! just go ahead and bypass that switch man, it'll save you hundreds of headaches!

TriforcePowered 12-11-07 11:41 AM

I was thinking if... or more like when, it bends again I'll bypass it then.


All times are GMT -5. The time now is 01:21 AM.


© 2024 MH Sub I, LLC dba Internet Brands