RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   my planned set up (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/my-planned-set-up-589868/)

Secondmessiah 10-22-06 07:41 PM

my planned set up
 
I have owned my 1987 TII for a while and have planned some modifications

I currently have a RB catback on there

I am adding:
-Bonez High flow cat
-RB downpipe
-Cone filter w/airbox


Based on my research, I should be safe, but I wanted to be certain that i could do these modifications safetly on the stock fuel set up and ECU. Will I hit fuel cut? What sort of HP bonus should this whole system bring (over stock)

JCurry 10-22-06 07:54 PM

your gonna hit fuel cut, and you NEED to port your wastegate also. Look into the rtek upgrade its worth the money....

dwb87 10-22-06 07:59 PM

Go with Rtek 1.8 and run four 720cc injectors. That's what I am going to be doing hopefully.

KeloidJonesJr. 10-22-06 08:00 PM

I've heard eliminating fuel cut may cause engines to blow up soon thereafter when running hard. Know what you are doing if you are taking it off.

JCurry 10-22-06 08:04 PM

only way that eliminating fuel cut would blow your engine would have to be a bad mixture of not enough fuel, non ported wastegate, and tons of boost creep!

Secondmessiah 10-22-06 08:28 PM

what sort of boost numbers could i expect?

88rxn/a 10-22-06 08:49 PM

i have a Rtek 1.7 if your interested!
PM me if you are...

FCKing1995 10-22-06 09:27 PM

+1 on the Rtek 1.7-1.8, and ported wastegate. if you have extra to spend, go ahead and get a BNR hybrid turbo. thatll take care of your wastegate problem and give you a new, much better turbo that you will make a good bit more power on


All times are GMT -5. The time now is 01:39 AM.


© 2024 MH Sub I, LLC dba Internet Brands