my ass is to big for my seat
 

alright no smart ass remarkes lol.
anyways i am a big guy 6'4 240. these seats were not designed for some american caliber. (T2 seats)
my question is this, has anyone had a automotive upholstery shop modify or widen the the seat
these things are realy killing me

yeah im kinda fat too and they seem kinda tight haha.....

the cheapest/easyest way i can think of to overcome this problem would be to buy a racing seat

sparco sells a "large person" racing seat it is called evo L, or evo XL , even larger ( 2" wider) i belive they are only non adjustable racing seats however......

Sparco used to just call them the EVO2 and EVO3 seats.
They are just wider versions of their popular EVO seat.

I think they just renamed them, cause they are now called "EVO L" and "EVO XL".


-Ted

Maybe you should trim down a little. I am 6'5 and fairly muscular and I fit in fine,,,,

If not, you could just find aftermarket seats....

pepboys sells a good seat too and they are cheap

That's a real stupid thing to say.
Men are not like women (unless the original poster was a female???).
Men collect fat in their bellys.
Unless you're grossly overweight, not too much of that fat goes on your ass.
Thus, the hip bones dictate how big of a seat you can sit in comfortably.

I'm 6'1" 240#, and I absolutely do not fit in any of the standard Bride seats.
I also do not fit in the Sparco EVO (regular), but I fit in the the EVO2 or EVO L no problem.

Unless you meant "trim down a little" meaning shaving your hip bones???


-Ted

I'm 6'4 and 260... but was blessed with a tiny little ass. :101384_l:

I fit on the bottom just fine but the top is a bit tight. Nothing too bad, or umcomfortable.

We big guys just get no love in the sports compact world :(

hahahahaa....u guys must drive with your head out of the sunroof :rlaugh:

Headroom is perfect in my TII... Now, getting INTO the car... that is funny, first... I stick my head in, then put my right arm in and sit my ass on the side of the drivers seat and pull the right leg in, then, shimmy the ass into position adn pull the left leg in.. But once im in there, I'm fine...

The Miata however...... Yes... my head sticks up over the top of the windshield.. kinda scary to think about actually.....

I'm 6'3" 240.... still wear 36 Pants.... I like the top of the seat.... its the friggin bottom that kicks my ass... can't put a wallet in my pocket or my friggin leg will go to sleep!!!!

And to answer your question about the seat, yes, you can take it to an uphosltry shop and have it modified. I'm going to have that done myself when i get the seats -reupholstered, specifically i'm going to have the bottom side runners bent out about an inch on either side and the back side bolsters pulled out about half an inch on either side..

My buddy bought some off brand "racing seat" for his RX and, while they WERE wider.. ther were also about TWICE as heavy as the stock TII seats.... screw that! And at the price of those SPARCO's.... yeesh

Oh yeah... you shrimps laugh ALL you want......


Personally, I think its freakin funny when some little jackass starts giving me shit while i'm IN the car.... the looks on their faces when i pull my ass out of it and come after them is friggin PRICELESS!!!!

I agree about the wallet thing. I can't sit in my seat with a wallet in my back pocket it kills. I'm only 6' 180#'s though. I fit pretty well

now im only 5'5 140lbs....now my ass fits fine and the seat...obviously my head doesnt stick out the roof of my rx and it wouldnt cause i dotn have a sunroof...lol anyways point is first thing i do when i get in the car is take my wallet out and sit next to me....my leg gets in so much pain like that...the wallett dids into my leg and eventually it may fall asleep i havent had the privelage for that to happen tho....i feel u guys pain...lol stupid wallets :dark:

You don't need to take it to a shop. Every 7 I have purchased had screwed up foam on the left drivers leg bolster, so when I go in to fix that I bend the bar that supports the leg bolsters out by about 1 in on each side. Its a pretty easy process, just a pain in the butt to remove and replace all those hog rings. Just make sure you hold the base of the leg bolster bar (I use a big vice) as the seat frame metal isn't that thick and the welds between the bar and the frame usually are quite small (I use big vice grips to bend the bar).

While your in there, use that white stringy tough fabric (batting or backing??) and spray glue to reconstruct things (use the 3M spray glue, don't use that junk you'll find at automotive stores, I don't know what its called, but it looks like it should be sold on an infomercial) . I rebuilt my foam this way in my TII over 6 years ago and it still looks and feels new.

lol,sorry i just wanted to say that this a funny post,truthfully,im like nearly anexric,,and ijm not talking about the weight problem..im talking about the height,im 511 and have problems whe ni hit im head on the way into my car occasionally,,these definately wernt made for americans..or non-asain people...not to be racist,but most asiains are small in stature compared to most americans..i dunno,i wish they made the 7 bigger

oh ya long story short...i believe im short andjealous as hel of tall people,and never get to hear stories...so this is funny for me

Time to get out the Dremel.

Wow, that's crazy!
The stock seats are a little over 30 lbs. - you saying those seats were close to 70 lbs. each??? :eek:


eBay to the rescue!
I've been scanning eBay for Sparco EVO2's for the past several months now.
I've gotten close, but I haven't won one yet.
I always keep getting overbid by one overzealous buyer! :P
There was an EVO3 (wider than the EVO2, and can't confirm if it'll even fit in the FC!) that went for a little over $350 a few days ago; the seat was in good shape, but the "wings" were faded (seat was black) - the winning bid for ~$370 was a steal, as brand new the EVO3 retails for $729!

Prior to that, there were a COUPLE auctions for PAIRS of EVO2's, and they went for a little over $900.
That's a damn good price for seats that cost $699 (retail) each!
In fact, one auction for a pair of them were BRAND NEW EVO2's (with sliders and side mounts) - the seats were just fitted into a project car then yanked - literally zero miles on them.
I'm surprised the seats actually pop up pretty regularly on eBay...

I better shut up now, cause I'm giving away all my parts hording secrets! :D


-Ted

yeah i feel ya, i can get both of my t2 seats redone in suede for the price of one sparco and bracket. altough i would like a set of sparcos some day

lol. I'm 6'2"/ 185 and my ass hurts to even LOOK at a Bride seat. I fit into my stock seat fine, but the previous owner of my car must have had a bony ass because 1/2 of the cusion is collapsing. After an hour or so sitting on a half-blown out seat, I feel like I need a Backyotomy. :sad:

Personally, I've been checking into Corbeau CR-1s.

Well the Lotus Elise wasn't made for asians, and I think for saftey purposes they don't sell them for people over 6 something.

:dark: race war lol

just messin with u....cause im no where near as tall as some of u guys and i already find getting in and out of the car a PITA.....like my leg sometimes wont fit between seat and the steering wheel if i lower it to the max.....

First thing I do when I get in my car is stuff my wallet, cell phone and other crap into the center console. I hate driving with ANYTHING in my pockets, to uncomfortable. I'm 5'10 180, so i'm kinda stocky and getting in and out can be a pain with my shoulders but i make do.

^ Yeah I always take my shit out. It's really uncomfortable otherwise.

My 88 GTU came stock with T2 seats, and with 150k on them they are in awesome condition. There is about a centimeter wear spot on the driver side bolster, that's all. All the cushions are fine. When I get into the car I usually contort my body a little bit to avoid wearing the side bolster if I can.

Jesus you guys are either fat or body builders... I'm going to go with fat. :)
I'm 6' 180 and I fit perfectly :)

I'm 5' 10" @ 175 and I fit perfectly.