more PERFORMANCE plz
ok i seriously need to do something about my off the mark acceleration I almost got smoked by a stock 323 astina with a fat exaust system now thats not cool thats border line embaressing what cheap mods can I do to improve my acceleration i need a new exaust system soon as mine has a hole in it (would that be effecting my performance) if I put a 4" straight thru exaust system will that help me ??
|
Ok i forgot to mention my car knowledge is pretty damn basic so I'll have to get someone ellse to do it for me
|
First off, I'm going to assume that your car is N/A. Four inch exhaust is about the WORST thing you can do for your car.
Please search. There are lots of articles on how to make an N/A faster. |
4" might be too big. i have a 3" and i think i didnt need it that big. 2 1/2 should be ok.
and yes, any FULL exhaust helps. the true duals system seems to be the best out there for an N/A. then help you car breath better (a cold air system or like it), then, if you want, get into the fuel system, tuning the fuel helps A LOT (by tuning i mean mostly leaning it out). SAFC-2 seems to be the best fuel 'tunner' when you can't go standalone. i have it aswell. and if you don't know how to tune it, have it tunned. those should give you some power. oops almost forgot...FULL TUNE UP! |
Sell it and buy a ferrari. Can't? Then stop getting mad if something's faster than you.
|
Best mod: skill.
|
Tear shit out!
But yeah, the best thing to do is to practice. |
You sure that 323 isn't running a B6PT (?) engine off of a 323 GT / GTX?
Hell, maybe it was inhaling nitrous? -Ted |
Originally Posted by RETed
You sure that 323 isn't running a B6PT (?) engine off of a 323 GT / GTX?
Hell, maybe it was inhaling nitrous? -Ted Yeah! B6T represent! I love my 323 GTX! The more popular swap for the Astinas is the BPT out of the 90-94 323 GTX, the Ford Escort GT/1st Gen Protege/Astina is usually what they stick those in. In either case it makes the Astina a fairly quick car, the B6T runs about 155 at the flywheel and the BPT is good for about 190 flywheel hp in stock form. To the poster: In any case, just tell yourself it had one of these motors and you'll feel a lot better. |
something had to be done to it theres no way a standard 323 could even keep up with just a standard N/A its like 88kw vs 225 btw would a short throw shifter help me as the distance between gears is quite considerable is this standard for an rx-7 gearbox, also how do extractors run on a rotary engine?
|
lol get an insane clutch...
my budie bought the 4 puck and the best pressure plate they had form racing beat it made a BIG difference.. |
A 4-puck isn't the most streetable.
|
What is SAFC-2?
|
SUper air flow controller. It can tune air fuel ratios in an RX-7.
Good for mad tuning yo. |
get a full 2.5" exhaust along with a damn good header (RB). get a 50 shot wet nitrous setup and rock out.
or.... sell it and get a TII. otherwise you're never going to be fast with that n/a unless you like high 14 second 1/4 mile slips (at best) :D shit that was beat up.... you seriously need boost tho hahaha |
Short of running a tube frame with a fiberglass body, a 13B n/a will never be fast :(
|
oh well just leave it till next yr when i can afford to drop a twin turb 13b in her found a place that will get me one for $2,500AU
|
"shit that was beat up.... you seriously need boost tho hahaha" (FB II)
soz dont know how to do quotes but.....huh? |
All times are GMT -5. The time now is 10:15 AM. |
© 2024 MH Sub I, LLC dba Internet Brands