Mod my hood?
So i have a spare hood for my 88 vert and was considering trying to modify a scoop or something similar.. i was gonna try and find a used sti hood scoop but think it might be a little much and not really functional. So i was curious if anyone has modified there stock hood at all and if anyone has pics that would be cool!
|
Here are some of a naca duct I did.
https://www.rx7club.com/attachment.p...0&d=1267582682 https://www.rx7club.com/attachment.p...1&d=1267582682 |
check this out i think it looks pretty badass http://www.cardomain.com/ride/232746...da-rx-7/page-5
|
1 Attachment(s)
I had to vent my hood because my intercooler and radiator are now v-mounted. I searched all across the place for a decent option, but have you tried searching for "hood vent" or "hood scoop"? All you get is a bunch of ridiculous crap. Giant scoops, ricer non-functional scoops, screw-on louvres, etc. A NACA duct is easy to find, but wouldn't have done me any good since I need air to go out, not in. One day I saw an Evo VII sitting outside work so I took some measurements while he wasn't looking :D
This was the "in progress" picture. I've finished it up now, with the exception of priming and painting the underside, since cutting the steel hood will cause it to rust in those bare spots. Let me tell you though, what a pain in the ass this was. There are 3 layers to go through, and 2 of them are glued together. Attachment 722878 |
i always wondered what the evo scoop would look like in there, any more photos?
|
4 Attachment(s)
I can, give me a minute. I haven't installed it yet, but this is what it's going on. Just imagine a turbo there, it's getting a rebuild. :)
Attachment 722879 Here we go, fresh pics: Here's the back Attachment 722880 Attachment 722881 And a couple side views: http://i307.photobucket.com/albums/n...7/DSCN0530.jpg Attachment 722882 Still not done. I have a little tweaking to get the vent to lay flat. I just hope it's in an area of low enough pressure to vent air out. . |
i wash the shit out of my car, did the evo come with some kind of rain gutter system?
|
Yeah, but i couldn't get the guy to sell me that part. It looks like louvres or something.
http://t3.gstatic.com/images?q=tbn:A...2PlWh7tFRvbNZt Now, if I could have found this one... http://www.lancershop.com/customer/i...ted-vent-b.jpg |
|
|
I wanted to do something with mine at one point and finally found some I like. I just dont know if the guy is selling them anymore. Plus I'm in community college, looking for a job, and own an RX7 so it's not like I have money for them anyways. lol
Check them out: http://forums.nicoclub.com/masa-moto...s-t482427.html http://farm5.static.flickr.com/4046/...c19d7293_b.jpg |
|
Originally Posted by Rob XX 7
(Post 10399511)
yuck
|
I would suggest selling your extra hood (or both hoods) and getting a TII, or an aftermarket hood. I have yet to see a "customized OEM" hood that is as nice looking.
|
Originally Posted by LunchboxCritter
(Post 10401304)
I would suggest selling your extra hood (or both hoods) and getting a TII, or an aftermarket hood. I have yet to see a "customized OEM" hood that is as nice looking.
|
Originally Posted by Bjeralds
(Post 10401230)
I wanted to do something with mine at one point and finally found some I like. I just dont know if the guy is selling them anymore. Plus I'm in community college, looking for a job, and own an RX7 so it's not like I have money for them anyways. lol
Check them out: http://forums.nicoclub.com/masa-moto...s-t482427.html http://farm5.static.flickr.com/4046/...c19d7293_b.jpg chaser aero sells a hood with those vents in it, they are a sponsor on this board check them out |
with that scoop i posted, you could do similar to this
Mold it in looks awesome and functional http://i53.tinypic.com/mcpwn5.jpg http://i54.tinypic.com/qrchhw.jpg http://i52.tinypic.com/dwe5qv.jpg People will be quick to dislike due to being on drift cars. Should perform better then that EVO stuff posted above since it has that angle in front of it. Forum member Nopistons! was building his own, looks pretty dam good https://www.rx7club.com/showpost.php...3&postcount=66 Gutted my 240sx hood and rocked hood pins http://i54.tinypic.com/2hd4dux.jpg freaking awesome for that car or steel hoods.. not sure about aluminum. http://i51.tinypic.com/2ibf66r.jpg the vents remind me of the vents from a water heater enclosure http://www.askmehelpdesk.com/attachm...0417100240.jpg |
4 Attachment(s)
|
Originally Posted by Hypertek
(Post 10402695)
with that scoop i posted, you could do similar to this
Mold it in looks awesome and functional the vents remind me of the vents from a water heater enclosure http://www.askmehelpdesk.com/attachm...0417100240.jpg I dont care how sideways a car is going or how JDM it is, I just dont like that look on the hood, looks like someone took some flat stock and made some shit that has no flow to it, just awful looking and you said it yourself it looks like a locker |
Yeah, there is nothing sexy about those "sexy style" hoods. There are no curves, no subtle features just this angular in your face grotesque vent.... did I mention the vent looks like shit?
|
Boost, where does the intake lead to?
Riz. |
http://sphotos.ak.fbcdn.net/hphotos-..._1751497_n.jpg
i'm going to make a fiberglass hood and use this one as a mold. |
Originally Posted by Syritis
(Post 10403423)
http://sphotos.ak.fbcdn.net/hphotos-..._1751497_n.jpg
i'm going to make a fiberglass hood and use this one as a mold. |
well i have yet to see any good homemade hoods in this thread besides the ones i posted lol
|
Originally Posted by boost-67
(Post 10402733)
here mine i just made
http://i253.photobucket.com/albums/h.../happyhood.jpg http://i253.photobucket.com/albums/h...ldonescoop.jpg http://i253.photobucket.com/albums/h...lldonevent.jpg http://i253.photobucket.com/albums/h...ix/newhood.jpg You cooling the alternator? :lol: |
Originally Posted by Hypertek
(Post 10403453)
well i have yet to see any good homemade hoods in this thread besides the ones i posted lol
tt's hood is pretty nice others look a bit stucco-ish, lol |
Originally Posted by Rob XX 7
(Post 10403436)
seems that everyone who is going to make a hood or a lip vanish never to be heard from again, good luck on your project
|
Originally Posted by john ward
(Post 10401395)
ummmm. well... Most dont have the skill that titaniumtt does, but his hood is WAY nicer than most aftermarket.
Originally Posted by Rob XX 7
(Post 10403436)
seems that everyone who is going to make a hood or a lip vanish never to be heard from again, good luck on your project
Originally Posted by Hypertek
(Post 10403453)
well i have yet to see any good homemade hoods in this thread besides the ones i posted lol
Originally Posted by Rob XX 7
(Post 10403462)
tt's hood is pretty nice
others look a bit stucco-ish, lol |
Originally Posted by TitaniumTT
(Post 10401266)
Good luck, here's mine
http://rotarycarclub.com/rotary_foru...1&d=1249955648 http://rotarycarclub.com/rotary_foru...1&d=1250048139 http://rotarycarclub.com/rotary_foru...1&d=1250826767 http://rotarycarclub.com/rotary_foru...1&d=1293771716 |
Originally Posted by TitaniumTT
(Post 10403617)
Thanks Rob... there's nothing but a bridge or two, you've got a'vert that I'm sure will inspire me on my black 'vert, yet... we've never met? i bet your vert will be way more trick then mine, pissed I missed the 5 point thing because I wanted to check out your car and shoot the shit about certain things on it |
lol imma buy a t2 hood but for now my shitty one will work, i just cut a hole and popped on a scoop, now imma flip it around so it doesnt pull it air it blows it out, dam clutch fan just a blowing. u can see it one my profile pic
|
6 Attachment(s)
Originally Posted by Rob XX 7
(Post 10403949)
i bet your vert will be way more trick then mine, pissed I missed the 5 point thing because I wanted to check out your car and shoot the shit about certain things on it
Originally Posted by clokker
(Post 10403648)
Sure wish I could see these pics...all I get is a sign in page.
https://www.rx7club.com/attachment.p...1&d=1294506936 https://www.rx7club.com/attachment.p...1&d=1294506936 https://www.rx7club.com/attachment.p...1&d=1294506936 https://www.rx7club.com/attachment.p...1&d=1294506936 https://www.rx7club.com/attachment.p...1&d=1294506936 https://www.rx7club.com/attachment.p...1&d=1294506936 |
^ very nice job.
|
Yep TT damn nice looking hood.
|
I never realized you did that in alum, I thought it was glass!
That guy still has the atilla hood |
I don't see many things on this forum that I want to copy, but you did a great job on that hood TT. I did the evo vent on mine as a quick and dirty fix, but this may have to be the next step. Only in steel, as I don't have the ability to weld aluminum yet.
I'm sure the gussets on that hood will offer some structural support, so all the webbing underneath can get cut out too. That way, it'll only be 10x as heavy, not 100x :) |
Originally Posted by Nick_d_TII
(Post 10404126)
^ very nice job.
Originally Posted by AGreen
(Post 10404195)
I don't see many things on this forum that I want to copy, but you did a great job on that hood TT. I did the evo vent on mine as a quick and dirty fix, but this may have to be the next step. Only in steel, as I don't have the ability to weld aluminum yet.
I'm sure the gussets on that hood will offer some structural support, so all the webbing underneath can get cut out too. That way, it'll only be 10x as heavy, not 100x :)
Originally Posted by Rob XX 7
(Post 10404159)
I never realized you did that in alum, I thought it was glass!
That guy still has the atilla hood If we're talking about the same guy, I bought it back in July... it's sitting on the vert right now, just waiting. |
Originally Posted by TitaniumTT
(Post 10404266)
If we're talking about the same guy, I bought it back in July... it's sitting on the vert right now, just waiting.
|
TitaniumTT your hood does look good. I would bet it's beyond most people's capability to do that.
How many hours do you have invested in that? I would bet that if you charged yourself $15-$20/hr for the labor, materials, etc. it cost more than an aftermarket hood, but less than a custom "one off" hood. |
Originally Posted by Rob XX 7
(Post 10404398)
never painted? Jon?
Originally Posted by LunchboxCritter
(Post 10404419)
TitaniumTT your hood does look good. I would bet it's beyond most people's capability to do that.
How many hours do you have invested in that? I would bet that if you charged yourself $15-$20/hr for the labor, materials, etc. it cost more than an aftermarket hood, but less than a custom "one off" hood. Saving coin wasn't the point. The point was to have a functional hood which is what I have. It's ducted strait to the intercooler. I never had a problem with AIT's, so flow through the core wasn't an issue. It was heatsoaking when I'd sit waiting for an auto-x to start. The hood helps with that better than any of the aftermkt hoods that i've ever seen. Now, if someone wants to pull a mold off of it.... then it could be reproduced much cheaper than a one off. |
Wow I didn't realize TT's hood was aluminum either... Very nice!
The quick hood I did for my v mount is steel... Next hood will be a CF razor style with aluminum ducting.... Here's the Steel one. https://www.rx7club.com/album.php?al...ictureid=27700 https://www.rx7club.com/album.php?al...ictureid=32233 https://www.rx7club.com/album.php?al...ictureid=27700 IPhone won't let me post the pics directly |
Functional = awesome. Nicely done. Is your car still @ Daves? I'll actually be there in a few weeks with a few friends for some dyno'ing
|
Originally Posted by TitaniumTT
(Post 10404678)
Functional = awesome. Nicely done. Is your car still @ Daves? I'll actually be there in a few weeks with a few friends for some dyno'ing
Yeah its still there... If all went well last week, It should be done and I can go pick it up this week. I'm gonna give him a call tomorrow. |
Sorry for never returning to my post. Dont have computer access too often right now. TT's hood is beautiful but out of my fabricating abilities.. The evo hood scoop looks good and within my skill range..
|
All times are GMT -5. The time now is 02:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands