RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   2nd Generation Specific (1986-1992) (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/)
-   -   Low end shudder (https://www.rx7club.com/2nd-generation-specific-1986-1992-17/low-end-shudder-506827/)

Jarome 02-05-06 11:59 PM

Low end shudder
 
Hey
So i've recently bough a 2nd gen with a rebuild motor that apparently was properly broken in...but i have no way of knowing if this is true or not...
my question is...what would cause a shudder from about 1300-2000 rpm
the motor runs smooth before and after that range but at that point it seems like it's really struggling

n/a-luvr 02-06-06 09:24 AM

Regardless of gear? Even in neutral? How much throttle are you giving it? Please be more specific about the operating conditions as lots of things could be causing your problem. ~rich

Jarome 02-07-06 01:21 AM

it's only noticable in neutral when the car is parked, and less than a 1/4 throttle if that...

n/a-luvr 02-07-06 01:25 PM

with clutch in or out? does it do it when its warmed up or only cold? in the meanwhile, check your tps to make sure it's adjusted properly. ~rich

Jarome 02-07-06 01:27 PM

the clutch position doesn't seem to matter in/out, and it's more predominant when the motor is warm

Jarome 02-07-06 02:38 PM

the car is quite new to me and i was curious if this is a common issue with 13b's or what could be causing it

vaughnc 02-07-06 09:06 PM

stuttering (coughing/sputtering)is bad. Shuttering / vibrating is probably old/worn motor mounts, tranny mounts, differential mounts, etc...

If you got documentation with the car, see if the dealership installed motor mounts along with the engine.


All times are GMT -5. The time now is 06:01 AM.


© 2024 MH Sub I, LLC dba Internet Brands