Logicon Unit & Wiper problems
my entire logicon and wiper switch shut off together every now and then. It is just them that stop working, and they always stop at the same time.
What could be causing this? Cold solder joints? If so, in what? |
Just a thought, but next time it happens, try turning the ignition key counterclockwise just a hair. I have that problem on mine, it's just something wrong in the switch. It takes out my logicon, wiper switch and I can't remember what else. It's not enough of a hassle to fix so I live with it.
|
Bad 2nd ignition contact or wire in the ignition switch
|
any solutions icemark? can I resolder the joints or anything?
|
fix or replace the ignition switch
|
any more specifics to the fix part? any ref to the fsm?
|
is it the solder joints on the back of the switch or the internal contacts
|
could be either, I normally just buy a new switch and its fixed... they are pretty cheap from Mazdatrix
|
cool. thanks a lot mark
|
All times are GMT -5. The time now is 08:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands