let me see yo turbos!!!!!
 

pop the lid and take some pictures.. i want to see some turbos hybirds to big mofo T-whatevers.. im bored and need some rotary porn so let seen some 2nd gens with big turbos

Charlie Murphy Wants To See Your Turbos!!!!!!!

I guess ill start this off..monSTAR t-70 1.15a/r

http://redt2.cyberosity.com/Picture%20013.jpg

sweeet ...very clean and simple thats a greddy fmic? "sho me some mo people"

did u make that carbon fiber panel?
nice turbo setup by the way, very clean

BNR 3 on a S4 hotside:)

http://img.photobucket.com/albums/v2...0703Medium.jpg

http://img.photobucket.com/albums/v2...1171Medium.jpg

yesssssssss!

what are the dimensions on that IC? Your going with stock s5 or s4 bumper?

stock turbo, S5 hotside, ported WG. polished compressor housing. got teh shit out of the way so you can actually see it ;-)

I've got a hybrid in my garage, I just didn't have time for the hassle of intake manifold / compressor housing clearance issues right now.

short IC piping > *.*

https://www.rx7club.com/attachment.p...d=123665&stc=1

Don't quote me on this...but it is the Greddy Rspec 23X11X2.75. The thing weighs around 15lbs.

And I have the S5 bumper on it now....it has been all trimmed up...I will get some pics when I get home this weekend.

I like your custom panel

I love big ass greddy intercoolers....

:drool1:

alright alright sho me shum mo turbos (damn my gol' toof fell out of my smile^^)

My SR Motorsports KKK.

http://memimage.cardomain.net/member...04_12_full.jpg

http://img319.imageshack.us/img319/5137/bling2fu.jpg

http://img319.imageshack.us/img319/1542/turbo19bl.jpg

http://img319.imageshack.us/img319/9666/turbo28vs.jpg

Ignore the zipties on the EBC haha :bigthumb:

got turbo?

https://www.rx7club.com/attachment.p...hmentid=123677

il2er: I love that damn car. How long did it take you to polish up those manifolds?

Thanks sonicrat.

The manifolds I had sent out to be polished but I did the pipes last week a few hours at a time. All by hand with 1000grit and Mother's aluminum polish. All in all about 12 hours. :eek: but it did save me a couple hundred bucks. If I were to do it over again it would be half the time since I didnt really have a good idea of what I was doing to begin with.

Spent another hour or 2 cleaning up the engine bay (waxing the paint, armorall wipes on all the black plastics and hoses). Spent another 3 hours claybarring and waxing too lol. You can see the reflection of my house in the headlight covers.

Yes I'm anal about the mistress. :rlaugh:

Nice! Zip ties are the shit lmao :)

Jesus christ, you for hire? :D

Twins baby!!!!!!!!!!!!

very similar to my cosme 13bre twins :bigthumb:

HKS T51s, sold in Japan only, introduced in 1997, same specs as Kai..

https://www.rx7club.com/forum/attach...d=123681&stc=1

Whn you upgrade your turbo do you have to upgrade anything else, like LIM??

still very new to this.... the IC is that Bolt on or moded from something else?

post some more snails! :-)

Jay, you useless postwhore. How about you at least take a pic of YOUR turbos. Sheeesh. :p:

With the hybrids you don't need to upgrade anything, since they use the stock turbine. With some of the bigger turbos you see, you need to get an aftermarket exhaust manifold. That's it.

Because you ASSCLOWN!!!! you can't see shit in my low quality pics foooooool.

I've been known to work for beer and food. Seriously. :rlaugh:

http://i6.photobucket.com/albums/y21...s/966bac2f.jpg
http://i6.photobucket.com/albums/y21...s/11dd9696.jpg

I gotta question, from the above pic, what's the purpose of getting a custom or aftermarket intake mani? Is that for turbo's only? Curious.

thats just the standard manifold polished matey

ok Here's my Turbo

T04B hybrid with S4 hotside and monster WG port + Ported runner
painted, cleaned and all the shit...

http://img.photobucket.com/albums/v2...e/DSCF0186.jpg
http://img.photobucket.com/albums/v2...e/DSCF0185.jpg
http://img.photobucket.com/albums/v2...e/DSCF0184.jpg

installed

http://img.photobucket.com/albums/v2...e/DSCF0187.jpg

damn im so jealous of jey jey with the clean chromey stuff that i have to pick on him about that cheap camera............. har har har but at least we know where his money goes.. now gimme shum mo turboS!!!!

1 of the T-74 GTS P-trim off the car and 1 on the car

thats crazy....... cleared for take off contact departure

whats crazy?

Some pics of my next engine, turbo and intercooler


http://memimage.cardomain.net/member...32_50_full.jpg
http://memimage.cardomain.net/member...32_56_full.jpg

http://memimage.cardomain.net/member...32_54_full.jpg

tell me thats not an SS-autochrome exhaust manifold...

You guys have some nice turbos, I am planning to have 1 big turbo next year. Here are mine, just the stock tt on the re. I need to get to work.

http://i23.photobucket.com/albums/b3...erfc/fmic3.jpg
http://i23.photobucket.com/albums/b3...rfc/mpt701.jpg

bloting it up as soon as i stop being lazy.

IL2ER - Man evry time I see your engin bay it catches my eye. I am polishing stuff right now to. Will post pics when done, have over 50hrs thus far.

i was refering to the t-74

ya its big aint it ? ;)

thanks matey
My project is nearly finished (4 weeks I hope)
I will post pics of the end result ( with a better camera ) :rlaugh:

What's wrong with the SSautochrome stuff?.....it works and its cheap.

It doesnt work.. the welds break more often than not. do a search for others that have owned them.

I've seen them used before...they work and look great

Yeah, I hate to admit that I have a lot experience with their manifolds, and have NEVER had a problem.

Since this is a thread for pics of turbos...I better post some :D

And yes, I realize that the TD07 25G is very dirty....

http://www.teamfc3s.org/forum/member...hp?img_id=6591
http://www.teamfc3s.org/forum/member...hp?img_id=6590
http://www.teamfc3s.org/forum/member...hp?img_id=8438