just fitted BOV - now cuts out out when I rev it - any ideas ?
hey guys I have just fitted a BOV and now when I rev the engine to say 5000rpm it wants to cut out unless I catch it when its droping off. otherwise I can start it and it will idle at 700rpm.
apart from that it sounds realy cool and very loud! Has anyone else had this problem. I have put it in place of the stock one and this one is not a re-circulating one so I am not sure if this is the reason why. |
so are u saying the car dies?
|
yes matey any ideas
|
did u plug off the hole on the stock TID??
|
yeah
|
make sure that there is no vacumes disconnected. or any air leaking from where u put it on. did u take the IC by any chance?
|
I did clean the BAC valve as the car was idling at around 1400rpms before.
But as for the IC its a chargecooler and was left in place! |
try messing with that. and make sure there is no are leaking from anywhere around the BOV. i had the same problem. if the slightest bit of air gets out then it whont idle right or die.
|
ok matey I will try that its now dark here but I will go and check it. ( Need it working going out racing with a TT in a bit all good fun .....)
thanks for your help will let ya know how it goes |
also try driving it around and get it to about 5k rpm's and let off the gas and let it rev down. but dont let your foot tottaly off and see if it backfires alot.
|
you need to get that part fixed it always comes off.
|
Originally posted by 1SxyRXy also try driving it around and get it to about 5k rpm's and let off the gas and let it rev down. but dont let your foot tottaly off and see if it backfires alot. But if I let totaly off, it goes whoosh and all is good I think ? It will tick over now as well the revs still drop off to like 100rpm then it rises to 700rpm. done the TID mod this morning too. I might get round to putting this billet flywheel and twin plate paddle clutch on of these days too. |
Sounds like you have a serious vacuum leak. Common place is where the TID meets the turbo.
|
o.k mate I will check it all out tommorow and make sure everything is all tight and sealed
|
well if it backfires alot. that means your either leaking from your bov or leaking from TID. it happend to my friend
|
All times are GMT -5. The time now is 08:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands